Catalogs >
Caterpillar Marine Power Systems >
Cat 3606 Propulsion Spec Sheets

Cat 3606 Propulsion Spec Sheets
2Pages

Catalog excerpts

Marine Propulsion Engine 3606 1730-2030 bkW (2320-2722 bhp) @ 900-1000 rpm CATERPILLAR® ENGINE SPECIFICATIONS In-Line 6, 4-Stroke-Cycle-Diesel Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . IMO compliant Shown with Accessory Equipment Bore — mm (in) . . . . . . . . . . . . . . . . . . . . . . . . . . 280 (11.0) Stroke — mm (in) . . . . . . . . . . . . . . . . . . . . . . . . 300 (11.8) Displacement — L (cu in). . . . . . . . . . . . . . . . . 111 (6,773) Rotation (from flywheel end) . . . . . . . . . . . . CCW or CW Compression Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13:1 Aspiration . . . . . . . . . . . . . . . . Turbocharged-Aftercooled Low Idle Speed — rpm. . . . . . . . . . . . . . . . . . . . . . . . . . 350 Rated Speed — rpm . . . . . . . . . . . . . . . . . . . . . . . 900-1000 Average Piston Speed — m/s (ft/s) . . . . 9-10 (29.5-32.8) Engine Firing Pressure — bar (psi) . . . . . . . . . . . . . . . . . . . . . 162-173 (2,350-2,509) BMEP — bar (psi) . . . . . . . . . . . . . . . . . . 22-22.9 (319-332) BSFC — g/bkW-h (lb/hp-h) . . . . . . . . 197-206 (.324-.339) PERFORMANCE DATA Rated rpm Maximum Continuous Continuous Service 1000 bkW 2030 1850 900 bhp 2722 2481 bkW 1900 1730 bhp 2548 2320 STANDARD EQUIPMENT Air Intake and Exhaust System Charge air cooler, air inlet shutoff, high flow turbocharger, dry manifold with soft or hard shielding Basic Engine Arrangement In-line engine with one-piece grey iron cylinder block, individual cylinder heads with four intake/exhaust valves, right- or left-hand service side available Cooling System Single or combined system, engine mounted freshwater and seawater pumps, engine coolant water drains Fuel System Engine operates on MDO; fuel injection system is comprised of engine-driven fuel transfer pump and a unit injector for each cylinder, engine mounted duplex fuel filters, and flexible connections Lube Oil System Top-mounted crankcase breather, two centrifugal oil filters with single shutoff, gear-driven pump, duplex oil filter, crankcase explosion relief, oil filler and dipstick Monitoring, Alarm, and Safety Control System Alarms and shutdowns provided as required by marine society for unmanned machinery spaces. Marine Monitoring System II or Engine Control Panel are available; systems include temperature, pressure, and speed sensors; cylinder pressure relief valves, oil mist detector, and particle detector available Speed Control Electric actuator, programmable electronic governor, optional mechanical ballhead backup General Four lifting eyes mounted to cylinder heads, Caterpillar yellow paint, parts books and maintenance manuals, shrink wrap Optional Supplied Equipment Torsional coupling, fresh water heat exchanger, fuel cooler, emergency pumps and connections, jacket water heater, flexible connections, and antivibration isolators LEHM1876-01

Open the catalog to page 1

03 02 3606 MARINE PROPULSION ENGINE — 1730-2030 bkW (2320-2722 bhp) 755 2733 3521 Centerline of Crankshaft 3521 01 01 01 Mounting Surface High Inertia Flywheel 170 02 841 1722 Engine Overall Length mm (in) Overall Width mm (in) Overall Height mm (in) 3606 4276 (168) 1722 (68) 2733 (108) Engine Weights kg (lb) Engine Dry Weight 15 680 (34,496) Shipped Loose Items: Torsional Coupling Plate-Type Heat Exchanger Instrument/Alarm Panel 319 (702) 400 (880) 200 (440) Fluids: Lube Oil Jacket Water Heat Exchanger (FW, SW, LO) 634 (1,395) 400 (880) 70 (154) RATING DEFINITIONS AND CONDITIONS MAXIMUM...

Open the catalog to page 2