STANDARD ENGINE EQUIPMENT • Crankcase ventilation system • Common Rail fuel system • 12V and 24V starter motor and battery charging alternator • Mounted air cleaner • Integral plate-type oil cooler • 3-phase AREP generators which provide the functionality of a permanent magnet excitation system • EMCP4.2 control panel with remote monitoring capability • Isolated sump • Anti-vibration engine mounts • Glowplugs aid starting in cold weather • Gear-driven sea-water and jacket-water pumps • Safety shutdowns for low oil pressure, high water temperature, and overspeed • Worldwide Extended Service Coverage (ESC) available • 7 available ratings to cover power demand of both 50 Hz and 60 Hz • Watercooled exhaust manifold and turbocharger Image shown may not reflect actual engine • EPA Tier 3/IMO compliant/CCNR Stage 2 Right Side • 7.01 liter displacement • 50 Hz 1500 rpm/60 Hz 1800 rpm rated engine speed • 105 mm (4.13 in) bore x 135 mm (5.32 in) stroke • Turbocharged-aftercooled aspiration • Electronically governed • Heat exchanger or keel cooled • Refill capacity – Cooling system: 8 L (10.0 U.S. gal) — hex 3 – Lube oil system: 21 L (5.6 gal) • Counterclockwise rotation from flywheel end • 500-hour oil change interval ENGINE DIMENSIONS & WEIGHT (1) Length (3) Height Weight, Net Dry (approx) Note: Do not use these dimensions for installation design. See general dimension drawings for detail.

MARINE ENGINE PERFORMANCE 50 Hz % Load OPTIONAL ATTACHMENTS • ontrol System C Governor droop kit (selecting this kit enables paralleling with appropriate customer-supplied switchgear) • Generators & Generator Attachments Space heater kit, installed — 120V AC, 240V AC • uel System F Double wall fuel lines with enclosed common rail and mounted alarm reservoir, duplex fuel filters • ube System L Duplex oil filters • tarting System S Additional 12V or 24V electric starter, air starter, jacket water heater options • arine Classification Society (MCS) Approval – M Pending ABS, BV, DNV, LR, GL, PRS,...