1. Catalogs
  2. Castoldi
  3. JT21LC_depliant

JT21LC_depliant

JT21LC_depliant

JT21LC_depliant

Product catalog summary
Design Category: C (C.E. Directive)
Dimensions:
  • Overall Length: 6.37 m
  • Maximum Beam: 2.58 m
  • Inside Breadth: 1.49 m
  • Maximum Storage Height: 1.17 m (with folded console and backrest removed)
  • Inflatable Tubes Diameter: 0.50 m max. (at transom)
Hull Type: Hard chine deep “V” monohedric hull with spray-rails and 18 degrees of deadrise at transom, developed for water jet propulsion system.
Seat Placement: Maximum capacity of 12 people.
Construction:
  • Hull: Single skin structure hand laid kevlar and vinylester resin.
  • Deck, Console, Engine Hatch: Sandwich structure hand laid glass and isoftalic polyester resin with nidaplast core.
  • Stringers System: Sandwich structure hand laid kevlar and vinylester polyurethane close cell foam core.
  • Inflatable Tubes: Hypalon/Neoprene coated polyester 1670 Dtex with 6 separate airtight compartments, removable tube system.
Propulsion System: Castoldi Turbodrive 240 H.C. waterjet unit with hydraulic clutch, debris screen, stainless steel impeller, and titanium liner.
Available Shelters: Bimini top, bimini top with weather curtain set, spray dodger (standard, recessed).
Displacement (Kg, approx.):
  • Boat Empty: 1450
  • Max Payload: 1200
  • Boat Light Loaded: 1850
  • Boat Full Loaded: 2650
Performance:
  • Max Speed (Knots): 40.5 (light load), 36 (full load)
  • Consumption at Max Speed: 54 lt/h
  • Endurance with 124 lt. Fuel Tank: 3 hours and 3 minutes at max speed
Draft (cm, approx.):
  • Boat Standstill: 44
  • Boat at Max Speed: 17
Motorization - Diesel: Marine diesel engine Yanmar/BMW type “6BY 260” - 260 HP / 4000 r.p.m., 6 cylinders, 2993 cm³ displacement.
Note: Data can be modified without notice and are not binding due to environmental trial conditions and construction tolerances.
See more

Catalog excerpts

JT21LC_depliant-1

Leaps ahead in marine products

 Open the catalog to page 1
JT21LC_depliant-2

DESIGN CATEGORY (C.E. Directive): C DIMENSIONS: - Length o.a.: Beam max.: Inside breadth: Maximum height for storage: Inflatable tubes’ diameter: 6,37 2,58 1,49 1,17 0,50 m. m. m. m. (with folded console and backrest removed) m. max. (at transom) HULL TYPE: Hard chine deep “V” monohedric hull with spray-rails and 18 degrees of deadrise at transom. Purposely developed for water jet propulsion system. SEAT PLACEMENT: MAXIMUM PEOPLE CAPACITY (C.E. Directive): No. 12 No. 12 CONSTRUCTION: - Hull: - Deck, console, engine hatch: - Stringers system: Single skin structure hand laid kevlar and vinylester...

 Open the catalog to page 2
JT21LC_depliant-3

Available shelters Spray dodger (standard, recessed) Bimini top Bimini top with weather curtain set

 Open the catalog to page 3
JT21LC_depliant-4

PERFORMANCE SHEET MOTORIZATION - DIESEL A N°. 1 marine diesel engine Yanmar/Bmw type “6BY 260” - 260 HP / 4000 r.p.m. 6 cylinders, 2993 cm³ displacement. DISPLACEMENT (with standard equipment - Kg. approx.) A - Boat empty (with water in engine and oil in engine and jet unit): 1450 - Max payload: 1200 - Boat light loaded (with 1/3 payload): 1850 - Boat full loaded (with 3/3 payload): 2650 MAX SPEED (Knots, approx.) A - In light load condition: 40,5 - In full load condition: 36 CONSUMPTION (lt/h, approx.) A - At max. speed: 54 ENDURANCE with 124 lt. fuel tank (hours and minutes, approx.) A - At...

 Open the catalog to page 4

Archived catalogs

  1. VECTOR 21

    2  Pages

  2. DC 550

    2  Pages

  3. Jet Tender 23

    3  Pages

  4. Jet Tender 21

    3  Pages

  5. Jet Tender 18

    3  Pages

  6. Jet Tender 17

    3  Pages

  7. Jet Tender 16

    3  Pages

  8. Jet Tender 15

    3  Pages

  9. Jet Tender 14

    3  Pages

  10. TD490 HC

    4  Pages

  11. TD400 HC

    4  Pages

  12. TD340 HC

    3  Pages

  13. TD282

    2  Pages

  14. TD238 HC

    8  Pages

  15. TD238

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.