*mynauticexpo

Catalogs
Castoldi
Jet Tender 23

Jet Tender 23

1 / 3 PagesView full catalog

Jet Tender 23

Product catalog summary

Design Category: CE Directive Category C

Dimensions:

Overall Length: 7.10 m
Maximum Beam: 2.68 m
Inside Breadth: 1.57 m
Maximum Height with Folded Helm: 1.24 m
Inflatable Tube Diameter: 0.50 m max (at transom)

Hull Type: Hard chine deep V monohedric hull with spray-rails and 20 degrees of deadrise at transom, specifically developed for waterjet propulsion systems.

Seating and Capacity:

Seat Placements: 14
People Capacity and Crew: 14 (CE Directive)

Construction:

Hull: Single skin structure with hand lay up Kevlar-vinylester resin skins.
Deck, Console, Engine Hatch: Sandwich structure with hand lay up glass-isophthalic polyester resin skins and honeycomb core.
Stringers System: Sandwich structure with hand lay up Kevlar-vinylester resin skins and polyurethane close cell foam core.
Inflatable Tubes: Hypalon-Neoprene polyester coated, 1670 Decitex with 6 independent airtight compartments.

Propulsion System: One Castoldi Turbodrive 238 H.C. waterjet unit with disconnecting multi-disc hydraulic clutch, movable debris screen on water intake, stainless steel impeller, and titanium liner on impeller housing.

Motorization - Diesel Options:

Option A: Yanmar type “6LPA-STP” - 315 HP / 3800 r.p.m., 6 cylinders, 4163 cm³ displacement.
Option B: Yanmar/BMW type “6BY 260” - 260 HP / 4000 r.p.m., 6 cylinders, 2993 cm³ displacement.

Displacement (with standard equipment – Kg approx.):

Boat Empty: A - 1720, B - 1550
Max Payload: 1200
Boat Light Loaded (1/3 payload): A - 2120, B - 1950
Boat Full Loaded (3/3 payload): A - 2920, B - 2750

Max Speed (Knots, approx.):

Light Load Condition: A - 41, B - 40
Full Load Condition: A - 37.5, B - 36.5

Consumption (lt/h, approx.):

At Max Speed: A - 67.1, B - 54

Endurance with 165 lt. Fuel Tank (hours and minutes, approx.):

At Max Speed: A - 2 hours 28 minutes, B - 3 hours

Draft (boat full loaded – cm, approx.):

Boat Standstill: 46
Boat at Max Speed: 18

Note: Data can be modified without previous notice and are not binding due to different environmental trial conditions and construction tolerances.

Catalog excerpts

DESIGN CATEGORY (CE Directive): - Inside breadth: - Maximum height with folded helm: - Inflatable tube diameter: HULL TYPE: SEAT PLACEMENTS: PEOPLE CAPACITY AND CREW (CE Directive): Hard chine deep V monohedric hull with spray-rails and 20 degrees of deadrise at transom, specifically developed for waterjet propulsion systems. - Deck, console, engine hatch: - Stringers system: - Inflatable tubes: PROPULSION SYSTEM: Single skin structure with hand lay up Kevlar-vinylester resin skins. Sandwich structure with hand lay up glass-isoftalic polyester resin skins and honeycomb core. Sandwich structure...

Open the catalog to page 2

-PERFORMANCE SHEET MOTORIZATION - DIESEL A N°. 1 marine diesel engine Yanmar type "6LPA-STP" - 315 HP / 3800 r.p.m. B N°. 1 marine diesel engine Yanmar/Bmw type "6BY 260" - 260 HP / 4000 r.p.m. DISPLACEMENT ( with standard equipment - Kg. approx.) Boat empty: Boat light loaded (with 1/3 payload): Boat full loaded (with 3/3 payload): MAX SPEED (Knots, approx.) In light load condition: In full load condition: ENDURANCE with 165 It. fuel tank (hours and minutes, approx.) DRAFT (boat full loaded - cm., approx.) Boat standstill: Data can be modified without previous notice and are not binding because...

Open the catalog to page 3

All Castoldi catalogs and brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list