*mynauticexpo

Catalogs
Castoldi
JET TENDER 19T

JET TENDER 19T

1 / 3 PagesView full catalog

JET TENDER 19T

Product catalog summary

Design and Specifications

Optional Features: Spray dodger and bimini top available.
Design Category: C.E. Directive Category C.
Dimensions: Length overall is 5.79 m, maximum beam is 2.21 m, maximum height with folded helm is 1.17 m, and inflatable tubes’ diameter is 0.46 m at the transom.
Hull Type: Hard chine deep “V” monohedric hull with spray-rails and 20 degrees of deadrise at transom, designed for waterjet propulsion.
Seat Placement: Capacity for 10 people as per C.E. Directive.

Construction

Hull: Single skin structure, hand laid with Kevlar and vinylester resin.
Deck, Console, Engine Hatch: Sandwich structure, hand laid glass and isoftalic vinylester resin with nidaplast core.
Stringers System: Sandwich structure, hand laid Kevlar and vinylester resin with polyurethane close cell foam core.
Inflatable Tubes: Hypalon/Neoprene coated polyester “1670 Decitex” with 5 separate airtight compartments.

Propulsion System

Waterjet Unit: Castoldi Turbodrive 238 H.C. with disconnecting multi-disc hydraulic clutch, movable debris screen, stainless steel impeller, and titanium liner on impeller housing.

Performance

Motorization: One marine diesel engine, Volvo Penta type “D3-190” with 190 HP at 4,000 r.p.m., 5 cylinders, 2,400 cm3 displacement.
Displacement: Boat empty is 1070 kg, max payload is 1070 kg, light loaded is 1427 kg, and full loaded is 2140 kg.
Max Speed: 40 knots in light load condition, 34 knots in full load condition.
Fuel Consumption: Approximately 40 liters per hour at max speed.
Endurance: Approximately 3 hours and 30 minutes with a 140-liter fuel tank at max speed.
Draft: 41 cm at standstill, 15 cm at max speed.

Catalog excerpts

Optional bimini top Optional spray dodger

Open the catalog to page 1

DESIGN CATEGORY (CE. Directive): - Maximum height with folded helm: - Inflatable tubes' diameter: HULL TYPE: SEAT PLACEMENT: MAXIMUM PEOPLE CAPACITY (CE. Directive): - Deck, console, engine hatch: - Stringers system: Inflatable tubes PROPULSION SYSTEM: Hard chine deep "V" monohedric hull with spray-rails and 20 degrees of deadrise at transom. Purposely developed for waterjet propulsion system. Single skin structure, hand laid Kevlar and vinylester Sandwich structure, hand laid glass and isoftalic vinylester resin with nidaplast core Sandwich structure, hand laid Kevlar and vinylester resin with...

Open the catalog to page 2

PERFORMANCE SHEET MOTORIZATION - DIESEL A N°. 1 marine diesel engine Volvo Penta type "D3-190" - 190 HP / 4.000 r.p.m. DISPLACEMENT (with Standard equipment - Kg. approx.) MAX SPEED (Knots, approx.) In light load condition: In full load condition: ENDURANCE with 140 It. fuel tank (hours and minutes, approx.) Data can be modified without previous notice and are not binding because of different environmental trial conditions and construction's

Open the catalog to page 3

All Castoldi catalogs and brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list