Technical Specifications:
The rescue boat is designed for yachts over 500 GT, compliant with IMO Res. MSC 81(70) and LY3 code. It features a hard chine deep V monohedric hull with spray-rails and a 20° deadrise at the transom, optimized for waterjet propulsion.

Dimensions:
- Length overall: 5.98 m
- Beam max: 2.44 m
- Height max at bow: 1.18 m
- Inflatable tube diameter: 0.46 m

Construction:
- Hull: Single skin structure with Kevlar and vinylester fire retardant resin.
- Deck and console: Sandwich structure with glass and vinylester resin and nidaplast core.
- Stringer system: Sandwich structure with Kevlar and vinylester resin and polyurethane foam core.
- Inflatable tubes: Hypalon/Neoprene coated polyester fabric with five separate airtight compartments.

Propulsion System:
- Equipped with a Castoldi Turbodrive 240 H.C. waterjet unit, featuring a hydraulic clutch, movable grid on water intake, stainless steel impeller, and titanium liner.

Performance:
- Consumption at max speed: 37 l/h
- Endurance with 140 l fuel tank: Approximately 3 hours and 47 minutes at max speed.
- Draft: 41 cm at standstill, 15 cm at max speed.
- Displacement: 1,300 kg empty, max payload 711 kg, light loaded 1,537 kg, full loaded 2,011 kg.
- Max speed: 36 knots light loaded, 32.5 knots full loaded.

Motorization:
- Diesel engine: Steyr type “SE164E40” SOLAS 163 mHP @ 4,000 rpm.

Note: Data may change without notice due to environmental conditions and construction tolerances.