*mynauticexpo

Catalogs
Castoldi
JET TENDER 19 FM

JET TENDER 19 FM

Product catalog summary

Design and Dimensions
The marine product is categorized under Design Category C according to the C.E. Directive. It has an overall length of 5.98 meters and a maximum beam of 2.44 meters. The inside breadth is 1.48 meters, with a maximum height at the bow of 1.18 meters. For storage, the height is reduced to 1.03 meters with certain components folded or removed. The inflatable tube diameter at the transom is 0.46 meters.

Hull and Construction
The hull is a hard chine deep V monohedric type with spray-rails and a 20° deadrise at the transom, optimized for waterjet propulsion. It is constructed using a single skin structure with hand-laid Kevlar and vinylester resin. The deck and console use a sandwich structure with glass and isoftalic polyester resin, while the stringer system incorporates a polyurethane closed cell foam core. The inflatable tube is made from Hypalon/Neoprene coated polyester fabric with five separate airtight compartments.

Seating and Capacity
The seating capacity is for 12 people, while the passenger capability according to the C.E. Directive is 10.

Propulsion System
The propulsion system includes a Castoldi Turbodrive 240 H.C. waterjet drive with a hydraulic clutch, stainless steel impeller, and titanium liner.

Technical Specifications
The boat features a 140-liter crosslinked polyethylene fuel tank, folding seats for the driver and co-driver, a swim ladder, two batteries, a removable ski-pole, and a hydraulic actuated folding console. Optional equipment includes a removable boarding handle.

Performance
The boat is powered by a Yanmar 4BY 180 marine diesel engine with 180 mHP at 4,000 rpm. The displacement with standard equipment is approximately 1,240 kg when empty, with a maximum payload of 1,030 kg. The maximum speed is approximately 37 knots when light loaded and 32 knots when fully loaded. Fuel consumption at maximum speed is about 37 liters per hour, with an endurance of approximately 3 hours and 15 minutes with a 120-liter fuel tank.

Draft
The draft is approximately 41 cm when the boat is at a standstill and 15 cm at maximum speed.

Note
Data may be modified without notification and are not binding due to differing environmental trial conditions and construction tolerances.

Catalog excerpts

Leaps ahead in marine products

Open the catalog to page 1

SOME OF THE REMARKABLE STANDARD EQUIPMENT TECHNICAL SPECIFICATIONS Removable ski-pole with bayonet jointed 360° white light Quick in-out tube system connection Removable boarding handle (optional) Hydraulic actuated folding console Professional waterjet drive with stainless steel and titanium main parts Removable backrest Set of 2 batteries Single lever box for the mechanical control of the engine rpm with integrated switch for electric/hydraulic reversing bucket control DESIGN CATEGORY (C.E. Directive): C DIMENSIONS: Lenght o. a.: 5,98 m Beam max: 2,44 m 1,48 m Inside breadth: 1.18 m Height...

Open the catalog to page 2

Bow folding removable dodger

Open the catalog to page 3

PERFORMANCE SHEET MOTORIZATION - DIESEL N° 1 marine diesel engine Yanmar type “4BY 180” - 180 mHP / 4.000 rpm 4 cylinders, 1.995 cm³ displacement DISPLACEMENT (with standard equipment - kg, approx.) - Boat empty: - Boat light loaded (with 1/3 payload): - Boat full loaded (with 3/3 payload): MAX SPEED (knots, approx.) - Boat light loaded: - Boat full loaded: ENDURANCE with 120 l fuel tank (hours and minutes, approx.) DRAFT (boat full loaded - cm, approx.) - Boat standstill: Data may be modified without notification and are not binding due to differing environmental trial conditions and construction...

Open the catalog to page 4

All Castoldi catalogs and brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list