1. Catalogs
  2. Castoldi
  3. Jet Tender 18

Jet Tender 18

Jet Tender 18

Jet Tender 18

Product catalog summary
Specifications:
  • Design Category: C (C.E. Directive)
  • Dimensions:
    • Length overall: 5.62 m
    • Beam max: 2.23 m
    • Inside breadth: 1.74 m
    • Maximum height with folded helm: 1.17 m
    • Inflatable tubes’ diameter: 0.46 m max (at transom)
  • Hull Type: Hard chine deep “V” monohedric hull with spray-rails and 18 degrees of deadrise at transom, developed for water jet propulsion system.
  • Seat Placement: 9 seats
  • Maximum People Capacity: 9 (C.E. Directive)
Construction:
  • Hull: G.R.P. hand layed, single skin
  • Deck, console, engine hatch: G.R.P. with nidacore sandwich; self-bailing cockpit with anti-skid surfaces
  • Stringers system: G.R.P. with polyurethane close cell foam core
  • Inflatable tubes: Hypalon/Neoprene coated polyester “1670 Decitex” with 5 separate airtight compartments
Propulsion System:
  • 1 Castoldi water jet unit type “Jet 05” with disconnecting clutch and movable debris screen grid on water intake
Motorization:
  • Yanmar diesel engine, “4JH3-DTE”, 125 HP
Fuel Capacity: 108 liters
Performance:
  • Motorization: 1 marine diesel engine Yanmar type “4JH3-DTE” - 125 HP / 3800 r.p.m., 4 cylinders, 1995 cm3 displacement
  • Displacement (with standard equipment):
    • Boat empty: 920 kg
    • Max payload: 810 kg
    • Boat light loaded (with 1/3 payload): 1190 kg
    • Boat full loaded (with 3/3 payload): 1730 kg
  • Max Speed:
    • In light load condition: 33.5 knots
    • In full load condition: 28 knots
  • Consumption: At max. speed: 25.7 lt/h
  • Endurance with 108 lt. fuel tank: At max. speed: 4 hours and 12 minutes
  • Draft (boat full loaded):
    • Boat standstill: 40 cm
    • Boat at max. speed: 16 cm

Note: Data can be modified without previous notice and are not binding due to different environmental trial conditions and construction tolerances.

See more

Catalog excerpts

Jet Tender 18-1

SPRAY DODGER REMOVABLE WINDSCREEN DECK SHOWER SINGLE HOOK

 Open the catalog to page 1
Jet Tender 18-2

DESIGN CATEGORY (CE. Directive): C - Maximum height with folded helm: 1,17 m. - Inflatable tubes' diameter: 0,46 m. max. (at transom) HULL TYPE: Hard chine deep "V" monohedric hull with spray-rails and 18 degrees of deadrise at transom. Purposely developed for water jet propulsion system. MAXPMUM PEOPLE CAPACITY (CE. Directive): No. 9 - Hull: G.R.P. hand layed, single skin - Deck, console, engine hatch: G.R.P. with nidacore sandwich; self-bailing cockpit with anti-skid surfaces. - Stringers system: G.R.P. with polyurethane close cell foam core. - Inflatable tubes: Hypalon/Neoprene coated polyester...

 Open the catalog to page 2
Jet Tender 18-3

JET TENDER® IS - PERFORMANCE SHEET MOTORIZATION - DIESEL A N°. 1 marine diesel engine Yanmar type "4JH3-DTE" - 125 HP / 3800 r.p.m. DISPLACEMENT ( with standard equipment - Kg. approx.) Data can be modified without previous notice and are not binding because of different environmental trial conditions and construction's tolerances.

 Open the catalog to page 3

Archived catalogs

  1. VECTOR 21

    2  Pages

  2. DC 550

    2  Pages

  3. Jet Tender 23

    3  Pages

  4. Jet Tender 21

    3  Pages

  5. Jet Tender 17

    3  Pages

  6. Jet Tender 16

    3  Pages

  7. Jet Tender 15

    3  Pages

  8. Jet Tender 14

    3  Pages

  9. TD490 HC

    4  Pages

  10. TD400 HC

    4  Pages

  11. TD340 HC

    3  Pages

  12. TD282

    2  Pages

  13. TD238 HC

    8  Pages

  14. TD238

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.