*mynauticexpo

Catalogs
Castoldi
Jet Tender 17

Jet Tender 17

1 / 4 PagesView full catalog

Jet Tender 17

Product catalog summary

Technical Specifications

Design Category: C (C.E. Directive)

Dimensions:

Overall Length: 5.36 m
Maximum Beam: 2.26 m
Maximum Height at Bow: 1.25 m
Inflatable Tube Diameter: 0.43 m

Hull Type: Hard chine gull-wing type hull with spray-rails, designed for waterjet propulsion.

Passenger Capacity: 9 (C.E. Directive)

Construction:

Hull: Single skin structure, hand laid Kevlar and vinylester resin.
Deck and Console: Sandwich structure, hand laid glass and isoftalic polyester resin with nidaplast core.
Stringer System: Sandwich structure, hand laid Kevlar and vinylester resin with polyurethane closed cell foam core.
Inflatable Tubes: Hypalon/Neoprene coated polyester fabric 1670 Dtex with 6+2 separate airtight compartments.

Propulsion System: Castoldi Turbodrive 240 H.C. waterjet unit with hydraulic clutch, movable grid, stainless steel impeller, and titanium liner.

Available Shelters: Bimini top, Bimini top with weather curtain set.

Consumption: 41.5 l/h at maximum speed.

Endurance: Approximately 2 hours and 30 minutes with a 104 l fuel tank at maximum speed.

Draft:

Boat Standstill: 40 cm
Boat at Max Speed: 16 cm

Displacement:

Boat Empty: 1,150 kg
Max Payload: 850 kg

Max Speed:

Boat Light Loaded: 34 knots
Boat Full Loaded: 31 knots

Motorization - Diesel: Volvo Penta type “D3-170” 170 mHP @ 4,000 rpm

Note: Data may be modified without notification and are not binding due to differing environmental trial conditions and construction tolerances.

Catalog excerpts

Since 1962 Forerunners, always

Open the catalog to page 1

DIMENSIONAL DRAWING AND REMARKABLE EQUIPMENT TECHNICAL SPECIFICATIONS DESIGN CATEGORY (C.E. Directive): C Inflatable tube diameter: 0,43 m HULL TYPE: Hard chine gull-wing type hull with spray-rails, specifically developed for waterjet propulsion system. PASSENGER CABABILITY (C.E. Directive): No. 9 CONSTRUCTION: Hull: Single skin structure, hand laid Kevlar and vinylester resin. Deck, console: Sandwich structure, hand laid glass and isoftalic polyester resin with nidaplast core. Stringer system: Sandwich structure, hand laid Kevlar and vinylester resin with polyurethane closed cell foam core....

Open the catalog to page 2

PHOTO GALLERY AVAILABLE SHELTERS Bimini top with weather curtain set

Open the catalog to page 3

MOTORIZATION - DIESEL N° 1 marine diesel engine Volvo Penta type "D3-170” 170 mHP @ 4.000 rpm DISPLACEMENT (with standard equipment - kg, approx.) Data may be modified without notification and are not binding due to differing environmental trial conditions and construction tolerances. CASTOLDI www.castoldijet.it Milano - Italy

Open the catalog to page 4

All Castoldi catalogs and brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list