1. Catalogs
  2. Castoldi
  3. Jet Tender 16

Jet Tender 16

Jet Tender 16

Jet Tender 16

Product catalog summary
Design and Specifications
  • Design Category: C (C.E. Directive)
  • Dimensions:
    • Overall Length: 5.00 m
    • Maximum Beam: 2.19 m
    • Inside Breadth: 1.24 m
    • Maximum Height (folded helm): 1.00 m
    • Maximum Height (with optional B.I.S.S. inflated): 1.24 m
    • Inflatable Tubes Diameter: 0.40 m max. (at transom)
  • Hull Type: Hard chine deep “V” monohedric hull with spray-rails and 18 degrees of deadrise at transom, designed for water jet propulsion.
  • Seating Capacity: 7 people
Construction
  • Hull: G.R.P. hand-laid, single skin
  • Deck, Console, Engine Hatch: G.R.P. with nidacore sandwich; self-bailing cockpit with anti-skid surfaces
  • Stringers System: G.R.P. with polyurethane close cell foam core
  • Inflatable Tubes: Hypalon/Neoprene coated polyester “1670 Decitex” with 5 separate airtight compartments
Propulsion and Motorization
  • Propulsion System: 1 Castoldi water jet unit type “Jet 05” with disconnecting clutch and movable debris screen grid on water intake
  • Engine: Yanmar diesel engine, “4JH3-DTE”, 125 HP
  • Fuel Capacity: 108 liters
Performance
  • Engine: 1 marine diesel engine Yanmar type “4JH3-DTE” - 125 HP / 3800 r.p.m., 4 cylinders, 1995 cm3 displacement
  • Displacement:
    • Boat empty: 864 kg
    • Max payload: 630 kg
    • Boat light loaded (1/3 payload): 1074 kg
    • Boat full loaded (3/3 payload): 1494 kg
  • Max Speed:
    • Light load condition: 35 knots
    • Full load condition: 30 knots
  • Fuel Consumption: 25.7 lt/h at max speed
  • Endurance: 4 hours and 12 minutes at max speed with 108 lt. fuel tank
  • Draft:
    • Boat standstill: 36 cm
    • Boat at max speed: 15 cm

Note: Data can be modified without previous notice and are not binding due to different environmental trial conditions and construction tolerances.

See more

Catalog excerpts

Jet Tender 16-1

OPTIONAL - SPRAY DODGER OPTIONAL – SINGLE HOOK OPTIONAL – B.I.S.S.

 Open the catalog to page 1
Jet Tender 16-2

DESIGN CATEGORY (CE. Directive): - Inside breadth: - Maximum height (with folded helm): - Maximum height (with optional B.I.S.S. inflated): - Inflatable tubes' diameter: HULL TYPE: SEAT PLACEMENT: MAXIMUM PEOPLE CAPACITY (CE. Directive): No. 7 Hard chine deep "V" monohedric hull with spray-rails and 18 degrees of deadrise at transom. Purposely developed for water jet propulsion system. - Deck, console, engine hatch: - Stringers system: - Inflatable tubes: G.R.P. hand layed, single skin G.R.P. with nidacore sandwich; self-bailing cockpit with anti-skid surfaces. G.R.P. with polyurethane close...

 Open the catalog to page 2
Jet Tender 16-3

JET TENDER® 16 - PERFORMANCE SHEET MOTORIZATION - DIESEL A N°. 1 marine diesel engine Yanmar type "4JH3-DTE" - 125 HP / 3800 r.p.m. DISPLACEMENT ( with standard equipment - Kg. approx.) Data can be modified without previous notice and are not binding because of different environmental trial conditions and construction's tolerances.

 Open the catalog to page 3

Archived catalogs

  1. VECTOR 21

    2  Pages

  2. DC 550

    2  Pages

  3. Jet Tender 23

    3  Pages

  4. Jet Tender 21

    3  Pages

  5. Jet Tender 18

    3  Pages

  6. Jet Tender 17

    3  Pages

  7. Jet Tender 15

    3  Pages

  8. Jet Tender 14

    3  Pages

  9. TD490 HC

    4  Pages

  10. TD400 HC

    4  Pages

  11. TD340 HC

    3  Pages

  12. TD282

    2  Pages

  13. TD238 HC

    8  Pages

  14. TD238

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.