• Design Category: C (C.E. Directive)
• Dimensions:
  • Overall Length: 4.58 m
  • Maximum Beam: 2.08 m
  • Maximum Height at Bow: 1.14 m
  • Inflatable Tube Diameter: 0.38 m
• Hull Type: Hard chine deep V monohedric hull with spray-rails and 22° deadrise at transom, optimized for waterjet propulsion.
• Passenger Capacity: 7 (C.E. Directive)
• Construction:
  • Hull: Single skin structure with hand-laid Kevlar and vinylester resin.
  • Deck and Console: Sandwich structure with hand-laid glass and isoftalic polyester resin, nidaplast core.
  • Stringer System: Sandwich structure with hand-laid Kevlar and vinylester resin, polyurethane closed cell foam core.
  • Inflatable Tubes: Hypalon/Neoprene coated polyester fabric with 5 separate airtight compartments and quick in-out tube system connection.
• Propulsion System: One Castoldi waterjet unit type Turbodrive 224 D.D. with Kevlar duct and stainless steel impeller.

• Available Shelters: Bimini top, Bimini top with weather curtain set, BO.FO.R.D. Bow folding removable dodger.
• Consumption: 22 l/h at maximum speed.
• Endurance: Approximately 3 hours and 22 minutes with a 74-liter fuel tank at maximum speed.
• Draft: 33 cm at standstill, 14 cm at maximum speed.
• Displacement: 810 kg empty, 650 kg max payload.
• Max Speed: 34 knots light loaded, 32 knots full loaded.
• Motorization: One marine diesel engine Yanmar type “4JH110” - 110 mHP / 3,200 rpm.

Note: Data may be modified without notification and are not binding due to differing environmental trial conditions and construction tolerances.