- Catalogs
- Carling Technoligies
- LW-Series
LW-Series
LW-Series
- Electrical: Contact ratings include 8 amps at 14VDC and 4 amps at 28VDC for one relay, and 1 amp at both 14VDC and 28VDC for two relays. It includes reverse polarity, over-voltage, cold cranking, transient voltage, and electrostatic discharge protections.
- Physical: The unit features LED illumination rated for 100,000 hours, with components made from acetate, silicone, and nylon materials. It weighs 44 grams.
- Environmental: Operating temperature ranges from -25°C to +85°C. It meets various SAE J1455 standards for temperature cycling, thermal shock, humidity, dust bombardment, and salt spray.
- Mechanical: The unit withstands sinusoidal and random vibrations, shock, and endurance tests according to SAE and MIL-STD standards.
Catalog excerpts
LW-Series Wiper / Washer Controls P ROD UC T W E BP A GE request sample, configure part The LW-Series Electronic Wiper Washer Control combines two switches into one self-contained unit allowing effortless control of both wash and wipe functions from a singular location. A variety of features and options including, Continuous low and high speed wiper positions, Six intermittent delay intervals ranging from 3-18 seconds, Push-to-wash button and an LED Nightlight indicator combine to provide the flexibility to meet most any Cab design. Typical Applications ∙ On/Off-Highway Equipment
Open the catalog to page 1
Tech Specs Electrical Contact Rating .187 (7.4mm) Quick Connect terminations standard. Reverse polarity protection Over voltage protection Cold cranking protection according to SAE J1455, Sections. 4.11.1.1.1 and 4.11.1.2.1 Transient voltage protection which includes load dump and inductive switching according to SAE J1455, sec. 4.11.2.2 Electrostatic discharge protection according to SAE J1455 Sec. 4.11.2.2.5.1 (Discharge a 150 pf capacitor that has been charged to a potential of 15kV through 150 Ohm resistor.) Meets all other EMI/EMC requirements for class C trucks. LED, rated 100,000 hours...
Open the catalog to page 2
Ordering Scheme Sample Part Number 00 No legend For standard legends, see “Standard Legend Codes” page For additional legends, please consult factory 00 No legend For standard legends, see “Standard Legend Codes” page For additional legends, please consult factory 6. LAMP #2 (ABOVE WIPE) Z 1 No legend Vertical (lamp 1 on top) Horizontal (lamp 1 on right) 5. LAMP #1 (ABOVE WASH) Z 1 8. ROCKER / PADDLE COLOR Wiper/Washer Control with six intermittent positions: low. high, wash/wipe Notes: 1 Relay coil current is 1A max. Relay must have an arc suppression in parallel with the coil. Ref P/N LC2-01...
Open the catalog to page 3
Standard Legend Codes YK WATER PUMP ISO compliant symbols. Consult factory for custom legends.
Open the catalog to page 4
Authorized Sales Representatives and Distributors Click on a region of the map below to find your local representatives and distributors or visit www.carlingtech.com/findarep. MIDDLE EAST ASIA-PACIFIC OCEANIA SOUTH AMERICA About Carling Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. With six ISO9001 and IATF16949 registered manufacturing facilities and technical sales offices worldwide, Carling Technologies Sales, Service...
Open the catalog to page 5All Carling Technoligies catalogs and brochures
BD1-Series5 Pages
CPV-Series6 Pages
PC-Series10 Pages
PB-Series10 Pages
CTB-Series3 Pages
CMB-Series5 Pages
CLB-Series5 Pages
C1005B-Series3 Pages
V-Series8 Pages
CSW-Series7 Pages
4M-Series6 Pages
LMR-Series3 Pages
LD-Series4 Pages
CKJ-Series7 Pages
CKP-Series10 Pages
CM-Series15 Pages
BD-Series8 Pages
VP-Series6 Pages
CLTM12-Series10 Pages
AV/AVH-Series6 Pages
W-SERIES10 Pages
V-Series Contura® IV, V & VII15 Pages
V-Series Contura® II & III13 Pages
HR-Series10 Pages