CANFLEX LIFE BOAT WATER TEST BAGS“LBB” Lifeboat test water bags are used for evenly distributed load tests. These test water bags come with fill/offload fittings and an automatic relief valve which is activated once the lifeboat bags achieves the desired weight. Some of the Life Boat Water Test Bags features are: All Canflex Life Boat Water Test Bags maintain a minimum 6:1 Safety Factor of the operational water test bag's Working Load. Complete with all accessories / parts: 1” NPT flange connection with PVC cap, 3/4” Drain– Coin valve, Automatic Pressure Relief Valve. (Optional: Also available 2” NPT connections). Testing of Life Boat loaded with LBB-375—(AV Safety) ABS load certificate / verification of capacity available. Gangway Load Test Bag w/ Flat Bottom Foldable for easy storage and transportation. All products are Manufactured in accordance with ISO 9001:2008 Quality Management Standard. Canflex (USA) Inc holds certificate No FM 517957 Courtesy of Navisafe NV (BELGIUM) LIFE BOAT WATER BAG TEST “ FILLING & OFFLOADING KIT” Complete Set with Clip Lok box Fire hose w/ 2-1/2 NST swivel X 2" female camlock CANFLEX offers all the required accessories for the filling and offloading of the Life Boat Bags “LBB”. The “Filling & Offloading Kit” is shipped / storage in a Clip-lok” wood shipping/storage container made of ¾” marine grade plywood 1) 2) 6 port manifold with 1” ball valves & 1” hoses 6 x 1" 20ft suction hoses w/ male camlocks at both ends 3) Water meter w/ 2 w/ female camlocks 1" PVC ball valve w/ female Camlock X 1” NPT female connection for LBBs 6 X 1" PVC ball valve w/ female camlocks at both ends 1 x 6 port manifold w/ 2” male camlock w/ ball valve X female camlock w dust cap. 1 x 2" 50ft fill /discharge fire hose w/ 2-1/2 NST swivel X 2" female camlock. The fire hose can be converted from fire 2-1/2 NST thread to a 2” male 2” Fill Hose + Water meter+ Manifold LBB w/ 1" PVC ball valve w/ female camlock & 1”hoses 1 x Diaphragm pump w/ female camlocks 1 x water meter w/ female camlock w/ ball valve X female camlock 1 x 2" 6ft suction hose w/ male camlocks at both ends CANFLEX (USA) INC 412-30th. Street -P.O. Box 1014-ANACORTES WASHINGTON 98221 Tel: (206) 282-8233 or (800) 544-8356 - Fax: (206) 282 5933 or (800) 635-8992; [email protected] ; www.canflexinc.com

CANFLEX (USA) INC “LIFEBOAT TEST WATER BAGS” Weight MATERIAL SPECIFICATIONS: “High Tenacity PVC coated Polyester Fabric ” - with RF (HF) Welded seams *Material Weight 48 oz/yd2 (1622 g/m2). Tensile Strength 924 lbs/in (8090 N/5cm) ; 2x2 Panama weave FITTINGS: All fittings are marine grade resistant. Each fitting is mounted on a patch that has a diameter greater than the fitting outside diameter. Each LBB has one 1" NPT flanged connection w/ PVC cap (Filling/Offloading), located on the top body of the LBB One ¾” coin valve located on the top body of the LBB One relief valve located in one side...