Divers Clearview Demister Diving Helmet and Mask De-Mister The Diver’s Clearview is a simple me-proven device which provides a hands-free method of keeping face ports of diving helmets and masks free of condensa on during working dives. The Diver’s Clearview is a clear Perspex lens which provides a double glazing effect by fi ing to the outside of the port retainer. It is a a ached to the diving helmet or mask by 2 screws which fit into the welding lens/accessory holes. A 90o fi ng with a clear PVC tube leads to the outlet from the HotWater suit. Fitting the Diver’s Clearview 1. Remove protec ve film from the device. 2. Offer up Clearview device and a ach using the two accessory screws. 3. Trim hose to appropriate length. 4. Connect the hose to the outlet from HotWater suit by inser ng the hose into the rubber HotWater hose. No drain holes are deemed necessary in the Clearview device as it is an imperfect fit on the mask/helmet offering adequate drainage for the hot water . C-Tecnics Ltd. Unit 1A Mugiemoss Road, Aberdeen, AB21 9US, Scotland Tel: +44 (0) 1224 608 000 E-Mail: [email protected]