Portalink – Mechanical ship unloader

Portalink Successful, proven engineering Buhler – your Partner Mechanical ship unloaders from Buhler – designed to handle a wide range of free-flowing bulk materials – are characterized among other things by being supplied from the single source. From evaluation and simulation of the optimal unloading process to design and engineering, structural analysis, manufacturing, installation, and start-up, your entire project will be handled by one single, competent and experienced partner. This enables the influence of individual parameters on overall performance to be clearly assessed and evaluated,...

Portalink 600/70TK in Egypt. Steerable, rubber-tired traveling gear with sixteen wheels.

Gentle conveying Low wear Low power consumption Environmentally friendly unloading

Portalink Customer value and features Efficient unloading The automatic sink-in system of the HL-SKT allows the intake boot to maintain the optimal position inside the bulk material. It also enables automatic unloading down to the minimum bulk material level inside the ship’s hold. The possible movements of: – displacing the ship unloader – lifting, lowering, and swiveling the boom – kick-in/kick-out of the marine leg provide a large working range inside the ship’s hold. These movements can also be remotely controlled by radio, increasing unloading throughputs and reducing berthing times. Six-wheel...

Introduction The HL-SKT is a high-capacity chain conveyor meeting the stringent requirements of efficient and trouble-free bulk materials handling systems. It is an enclosed, rugged conveyor of rain-proof and dust-tight design. This ensures environmentally friendly and gentle material handling. As a result of its very low power consumption and its easy operation, the HL-SKT has proven itself within a very short time as an efficient unloading conveyor. Mode of operation and main elements The intake boot of the HL-SKT sinks into the material to be unloaded, which must flow freely to the boot in adequate...