American Bureau of Shipping Product Design Assessment - 3 Pages

Add to MyNauticExpo favorites
American Bureau of Shipping Product Design Assessment

Catalog excerpts

Electronically published by ABS Houston. Reference T1619800, dated 27-APR-2017. CERTIFICATE NUMBER    DATE ABS TECHNICAL OFFICE Houston ESD - Ship Equipment Certificate of Design Assessment This is to certify that a representative of this Bureau did, at the request of BREEDT PRODUCTION TOOLING AND DESIGN, LLC assess design plans and data for the below listed product. This assessment is a representation by the Bureau as to the degree of compliance the design exhibits with applicable sections of the Rules. This assessment does not waive unit certification or classification procedures required by ABS Rules for products to be installed in ABS classed vessels or facilities. This certificate, by itself, does not reflect that the product is Type Approved. The scope and limitations of this assessment are detailed on the pages attached to this certificate. Product:    Fender This Product Design Assessment (PDA) Certificate 17-HS1619800-PDA, dated 27/Apr/2017 remains valid until 26/Apr/2022 or until the Rules or specifications used in the assessment are revised (whichever occurs first). This PDA is intended for a product to be installed on an ABS classed vessel, MODU or facility which is in existence or under contract for construction on the date of the ABS Rules or specifications used to evaluate the Product. Use of the Product on an ABS classed vessel, MODU or facility which is contracted after the validity date of the ABS Rules and specifications used to evaluate the Product, will require re-evaluation of the PDA. Use of the Product for non ABS classed vessels, MODUs or facilities is to be to an agreement between the manufacturer and intended client. Tim Kimble Engineer/Consultant NOTE: This certificate evidences compliance with one or more of the Rules, Guides, standards or other criteria of ABS or a statutory, industrial or manufacturers standards. It is issued solely for the use of ABS, its committees, its clients or other authorized entities. Any significant changes to the aforementioned product without approval from ABS will result in this certificate becoming null and void. This certificate is governed by the terms and conditions as contained in ABS Rules 1-1-A3/5.9 Terms and Conditions of the Request for Product Type Approval and Agreement (2010).

 Open the catalog to page 1

Electronically published by ABS Houston. Reference T1619800, dated 27-APR-2017. BREEDT PRODUCTION TOOLING AND DESIGN 811 1ST AVE S KENT WA United States 98032 Telephone: 206-859-1100 Fax: 253-859-1106 Email: abreedt@bptdesign.com Web: www.bptdesign.cm Tier: 2 - PDA Issued Product:    Fender Intended Service: Marine and Offshore Application - Dock Fendering for Mooring and Berthing of Marine Vessels. To protect pilings in commercial ports with medium to large, flat sided vessels. Description: Modular Floating Fender (Wheel Fender) 44" Diameter, 10" high, fits piles 12" - 16", 4 quadrants, 4...

 Open the catalog to page 2

Electronically published by ABS Houston. Reference T1619800, dated 27-APR-2017. BREEDT PRODUCTION TOOLING AND DESIGN 811 1ST AVE S KENT WA United States 98032 Telephone: 206-859-1100 Fax: 253-859-1106 Email: abreedt@bptdesign.com Web: www.bptdesign.cm Tier: 2 - PDA Issued ABS Rules: The Rules for Conditions of Classification, Part 1 2017 - Steel Vessels Rules 1-1-4/7.7, 1-1-A3, 1-1-A4. The Rules for Conditions of Classification, Part 1 2017 - Mobile Offshore Drilling Unit Rules 1-1-4/9.7, 1-1-A2, 1-1-A3. National: UFGS-35 59 13.16, Change 1, UNIFIED FACILITIES GUIDE SPECIFICATIONS,...

 Open the catalog to page 3

All Breedt Production Tooling and Design catalogs and brochures