Underwater Emergency Rechargeable Xenon Strobe C ; underwater vision specialists High Intensity Pressure Switch Hand Switch Daylight Switch Remote Head The Bowtech Products ST4K, Xenon rechargeable submersible strobes are self-contained, compact, high intensity xenon beacons designed for use as a visual aid to locate submersible vehicles, or instrumentation packages when they surface for recovery. They can also be used to mark underwater objects, vehicles, divers or work sites. The strobe is designed such, that when the ROV power (120 to 240Vac) is on, it will still switch the charging circuit for the strobe batteries on and switch the strobe off to conserve battery power. The strobe will constantly charge when the power is present, however the charging will switch off when the voltage on the batteries reaches the fully charged The unit will only operate if the following conditions 2. The pressure of seawater on the pressure switch is low enough to switch the unit on (i.e. above 10 metres of seawater) 3. The ambient light around the LDR sensor is low enough to switch the unit on © Bowtech Products Ltd 2014 All rights reserved. Bowtech Products Ltd reserves the right to change the above specifications without notice. Last updated 17th January 2014

Underwater Emergency Rechargeable Xenon Strobe C ; underwater vision specialists Flash Rate, adjustable: Tube Life: Battery Type: Battery Life: 2 x Rechargeable Nickel Metal Hydride Housing Materials: Hard Anodized 6082-T6 Aluminium Length: 225mm Excluding Switch, Head and Connector Window/Lens: Acrylic Switches: Pressure Activated Below 10m, Hand On/Off, Photocell, 100 Lux (adjustable) Anode: Zinc Photocell - A Photocell is included in each strobe, to turn the unit off and conserve battery life during daylight hours. The photocell is factory set to activate at approximately 100 Lux, however...

Underwater Emergency Rechargeable Xenon Strobe C ; underwater vision specialists REMOTE HEAD A remote head option is available, where the xenon tube with its acrylic housing is separated from the main housing, by a 1 meter cable assembly. This option allows the user to position the head in confined places. -Remote Head moulded © Bowtech Products Ltd 2014 All rights reserved. Bowtech Products Ltd reserves the right to change the above specifications without notice. Last updated 17th January 2014