STANDARD EQUIPMENT ■■ All hardware 316-L stainless steel ■■ All rails welded 316-L stainless steel 2017 SPECIFICATIONS > L.O.A.: 27’ 4” (8.33 m) (on centerline, from bow to engine mounting location) > L.O.A.: 27’ 10” (8.48 m) (includes swim platform and rubrail) > Beam: 9’ 0” (2.74 m) > Draft: 17” (0.43 m) > Weight (dry, no engine): 4,800 lbs (2,177 kg) > Weight (with engines, fuel and water, if applicable): 6,949 lbs. (3,152 kg) > Maximum Weight Capacity: 3,349 lbs (1,519 kg) > Swamped Capacity: 8,000 lbs (3,629 kg) > Height (keel to highest point): 7’ 7” > Height (lowest tip underwater gear, in down position, to top of windshield/hardtop): 8’ 6” > Persons Capacity: 12 > Maximum Horsepower: 450 hp (336 kW) > Minimum Horsepower: 300 hp (224 kW) > Deadrise at Transom: 18 > Fuel Capacity: 150 gallons (575 L) > Water Capacity: 18 gallons (68 L) > Maximum Engine Weight: 1,400 lbs (635 kg) > Transom Height: 30” (0.76 m) single; 25” (0.64 m) dual > Livewell Volume: 30 gallons (113.56 L) > Bridge Clearance: 6’ 3” (1.91 m) > Bridge Clearance (with hardtop): 9’ 3” (2.82 m) > Package Boat Specs (with trailer/engine up): 34’ 6”L x 9’ 0”W x 12’ 8”H > European Certification: C DECK / COCKPIT ■■ 24” aft interior freeboard ■■ 8” cleats – bow (2), stern (2), spring line (2) ■■ Aft welded stainless steel side rails ■■ Bow and stern lifting eyes ■■ Drink holders – forward (4), lounge (2), console (2), leaning post (2), aft seat (2) ■■ Forward grab rails with drink holders ■■ Full-width aft casting platform ■■ Garboard drain plug ■■ Heavy-duty rub rail ■■ Self-bailing cockpit sole ■■ Stern deck mounted stainless steel rod holders (5) ■■ Swim platform with telescoping ladder and grab handle CONSOLE ■■ Acrylic console access door with stainless steel latch ■■ Acrylic windshield ■■ Analog instrumentation and electrical switch panel with circuit breaker protection ■■ Cast stainless steel steering wheel with urethane grip ■■ Compass ■■ Courtesy light ■■ Drink holders (2) ■■ Electronics mounting surface ■■ Fire extinguisher pocket ■■ Interior light ■■ Molded fiberglass console liner ■■ Portable head in console (with pump-out) ■■ Seat cushion with backrest ■■ Stainless steel hooks (2) ■■ Stainless steel opening port light with screen ■■ Welded stainless steel grab rail SEATING ■■ Bow cushion ■■ Forward console seat ■■ Forward port and starboard seats with folding backrests ■■ Leaning post – includes: aluminum frame, cup holders (2), dual seats, fiberglass storage compartment, grab rail, removable backrest, rod holders (4), YETI cooler (94 qt), stern seat with folding backrest STORAGE ■■ Bow anchor locker with overboard drain ■■ Insulated bow storage lockers / fishboxes (3) with overboard drains and stainless steel gas shocks ■■ Lockable console front storage – holds 5 rods, 2 5-gallon buckets (included), miscellaneous gear and optional dive tank racks ■■ Lockable console storage ■■ Storage in leaning post ■■ Storage under aft seat MECHANICAL ■■ 300 XXL L6 DTS Mercury® Verado FourStroke engine with power steering ■■ Automatic bilge pump ■■ Battery trays (3) with switch and wiring ■■ Electric horn ■■ Electric trim tabs with indicators ■■ Engine fuel/water separator ■■ Freshwater shower (18 gallons) with stern sprayer ■■ Fuel tank (150 gallons) ■■ Navigation lights ■■ SmartCraft deluxe gauge package ■■ Stainless steel propeller ■■ Tilt s

□□ Casting platform with dedicated storage (forward) □□ Dive tank holders (foldable) □□ Deluxe leaning post with livewell – includes: 35 qt YETI cooler, bench seat with backrest and flip-up thigh rise, cup holders (2), livewell (30 gallons) with white light, raw water washdown, rod holders (2), sink with fresh water and pull-out sprayer, stainless steel grab rails □□ Deluxe leaning post with storage – includes: sink with freshwater and pull-out sprayer, storage drawers (3)(deleted with cockpit refrigerator option), solid surface countertop, cup holders (2), helm bench seat with backrest and flip-up...