GLASS PRODUCTION
20Pages

{{requestButtons}}

Catalog excerpts

GLASS PRODUCTION - 1

Wide range of marine and special glass: EMI shielding, fire and bullet resistant, heated, toughened, laminated.

Open the catalog to page 1
GLASS PRODUCTION - 2

BOHAMET specializes in marine production. We are the world largest manufacturer of ship windows, portholes, window boxes and marine glazing having over 27 years of experience in fabrication and development of new designs. We produce over 3000 windows per month and deliver them all over the world. And because of this, we are able to meet almost any customer requirement, including custom designs and solutions that meet the individual requirements of each design. From the smallest units, by barges, inland and seagoing yachts, thru cruise ships, military vessels, residential and mining...

Open the catalog to page 2
GLASS PRODUCTION - 3

ARMEX - BULLET RESISTANT GLASS 04 BOHFLAM EI30 - FIRE RESISTANT GLASS 06 BOHFLAM EI60 - FIRE RESISTANT GLASS 06 BOHFLAM EI90 - FIRE RESISTANT GLASS 07 BOHFLAM EI120 - FIRE RESISTANT GLASS 07 PRIVA CONTROL® GLASS 08 HEATING GLASS - INTELLIGENT HEATING POWER CONTROLLER IHPC-110 / IHPC-230 / IHPC-440 10 HEATING GLASS - MICROPROCESSOR CONTROLLERS BH-230 mini / BH-230 / BH-440 12 HEATING GLASS - TEMPERATURE CONTROLLER THERMOMATIC B 16 BOHGLAS® E-MAGNETIC - ABSORBING ELECTROMAGNETIC RADIATION GLASS 18

Open the catalog to page 3
GLASS PRODUCTION - 4

BOHGLAS® ARMEX GLASS BULLET RESISTANT GLAS CHARACTERISTICS Bullet-resistant glass ensures suitable resistance to penetration from missiles of handgun, such as small arms or hunting weapons. They have a widerange of applications and can be mounted in bank facilities, currency exchange bureaus, pawnshops, jeweller's shops, as well as used in military, by private users or in different types of vehicles exposed to assaults - in general, in all areas of higher risk of gun assaults. Apart from bullet-resistant properties, this type of glass is a product characterized with increased break-in...

Open the catalog to page 4
GLASS PRODUCTION - 5

classification and requirements for bullet-resistant glazing S - splinter glass, NS - non-splinter glass, PC - polycarbonate DGU - Double Glass Unit - insulated glass. Insulation with argon or other gases. Float glass or Low-E layer, Selective and High Selective layers in positions 2 or 3.

Open the catalog to page 5
GLASS PRODUCTION - 6

BOHFLAM® EI30 GLASS EI60 GLASS FIRE RESISTANT GLASS fire resistance classification EI 30 minimum production size maximum production size with nominal thickness maximum tested size (bigger sizes upon request) [bigger sizes upon request] information upon request information upon request external size tolerance +2 / -2mm weight for minimum thickness 34kg/m2 We reserve the right to change, modify or revise this publication without notice.

Open the catalog to page 6
GLASS PRODUCTION - 7

BOHFLAM® EI90 GLASS El 120 GLASS FIRE RESISTANT GLASS fire resistance classification nominal thickness minimum production size maximum production size with nominal thickness maximum tested size (bigger sizes upon request) (bigger sizes upon request) information upon request information upon request thickness tolerance external size tolerance weight for minimum thickness temperature range light transmission sound reduction Shading coefficient

Open the catalog to page 7
GLASS PRODUCTION - 8

PRIVA CONTROL® GLASS VARIABLE TRANSLUCENCY GLAS Variable translucency glass made of special liquid crystal film with variable translucency laminated between two glass panes. The control of the current flowing through the film allows to switch between transparent (power on] and non-transparent (power off) properties of the glass. Owing to this feature, Priva-Control® Glass is used to ensure privacy, increase safety and also as image and video projection screens. Priva-Control® Glass can be mounted in aluminium, steel and wooden frames. They can also be installed as hanging screens, partition...

Open the catalog to page 8
GLASS PRODUCTION - 9

DIMENSIONS Standard max. size of glass - 1400 x 3000mm. In certain cases we can produce glass of a size up to 3500mm. Min. size of glass - ca. 100 x 100mm. It is possible to join several films in one glass, however, the connection point will be visible. Edge machining, drilling of holes or cut-outs has to be specified at order. Glass treatment after laminating is not possible. CONNECTING The switch should be mounted before the transformer. Due to power surges in the mains we suggest to use UPS to provide voltage regulation. Glass switching control is provided with the use of the...

Open the catalog to page 9
GLASS PRODUCTION - 10

The New Generation series of miniature IHPC controllers introduces a new standard and innovative solutions for regulation/control of the temperature of electrically heated glass panes as regards their power, independently on their shape, structure and intended use. IHPC controllers guarantee smooth and stable regulation of the heating power supplied to the glass panes in the form of time splices, depending on the current demand and working conditions, in the full range from 0 to 100% of the total power. The innovative approach to the heating power control and the analysis of its demand,...

Open the catalog to page 10
GLASS PRODUCTION - 12

HEATING GLASSMICROPROCESSOR CONTROLLERS BH-230 mini / BH-230 / BH-440CHARACTERISTICS BH-230 mini, BH-230 and BH-440 are advanced microprocessor based controllers complete with an electronic system enabling fine adjustment of preset temperature. Adjustment is performed by means of user friendly buttons placed on the device panel. Due to the use of two glass-embedded sensors the system is more reliable - in the event that one sensor fails, the other still measures temperature, allowing the controller to work properly. Maximum load is 16Afor BH-230 mini and 30A for BH-230 and BH-440. BH...

Open the catalog to page 12
GLASS PRODUCTION - 13

To avoid electrocution or damage of the device, mechanical and electrical assembly should be performed by a qualified specialist Make sure that all cables are plugged correctly, before power supply is on. Voltage supply to the device must be turned off before any modifications to cable connectors. Provide appropriate working conditions in accordance with the device technical data [power supply voltage, humidity, temperature -chapter 5) FUNCTIONS OF BUTTONS IN MEASUREMENT DISPLAY MODE [UP] or [DOWN] - change of the preset value [F] (function button): start/stop of adjustment BINARY CONTROL...

Open the catalog to page 13

All Bohamet catalogs and brochures

  1. WIPER SYSTEMS

    20 Pages

  2. MARINE WINDOWS

    28 Pages