SUPERYACHT INTERIOR COATING SYSTEMS

Superyacht interior coating systems Market leader for superyacht paint systems, especially for protection of new constructions, and constantly focused on the development of advanced technology solutions to meet customer needs, today Boero YachtCoatings is looking at the interior surfaces of a yacht hull and superstructure to offer its specifically formulated products along with full RINA certificated paint system for Low Flame Spread. Interior coatings DRY Areas Behind Linings Low Flame Spread Certification 1 x 220μm BoeroGuard Visible Areas Tank coatings Fresh Water 2 x 150μm Boero Fresh Water...

BoeroGuard - Cod. 700.967High solid epoxy primer with LFS certification ■ High solids, anti-corrosive epoxy primer for use on all substrates in wide range of atmospheric conditions, above and below waterline. ■ With good wetting properties, BoeroGuard has good surface tolerance, with minimal surface preparation required and is suitable for interior coating systems where Low Flame Spread is required, water ballast tanks and technical tanks and void spaces. ■ BoeroGuard can be used as part of an osmosis protection system on composite hulls. ■ Certified: RINA Low Flame Spread, MED class II. The...

Boero Fresh Water EU - Cod. 700.910True solvent-free epoxy tank coating • Two-component tank coating, specifically formulated for freshwater tanks. •Zero VOC, as a true solvent-free formulation and is virtually odourless. • Easy application, applied by airless and brush & roller for stripe coating. •Wide range of substrates, suitable for steel, aluminium and composites, with excellent adhesion. •Potable water certification, RINA in compliance with DM 174/2004. The colours shown are indicative and for illustrative purposes only Technical specifications

Boero Grey Water - Cod. 700.903High solids modified epoxy tank coating •Two-component tank coating, suitable for Grey and Black water tanks. •Suitable for a range of tanks, specifically formulated with excellent chemical resistance. • Easy application, applied by airless and brush & roller for stripe coating. •Wide range of substrates, suitable for steel, aluminium and composites, with excellent adhesion. The colours shown are indicative and for illustrative purposes only Technical specifications

yachtCoatings Boero Bartolomeo S.p.A. Via G. Macaggi, 19 - 16121 Genova - Italy TeL. +39 010 5500.1 boeroyachtcoatings.com - [email protected]