
CLEANING & MAINTENANCE OF YACHT TOPCOATS
Open the catalog to page 1Cleaning and Maintenance of Yacht Topcoats The function of the yacht topcoat is not only providing an attractive mirror like gloss finish, but more importantly for the protection the yacht’s structure and substrates. In cases of abrasion or deep scratches, an immediate repair is recommended to avoid the penetration of humidity into the substrate as this may cause blistering, rust or de-lamination of the paint layers. For every touch up or repair, only the Boero products should be used according to project maintenance specification. For the paint film to remain intact, keeping its gloss finish,...
Open the catalog to page 2Wash Down Wet the painted surface with a low-pressure freshwater jet to remove salt residue. • To minimise streaks, wash regularly with plenty of freshwater, preferably from a supply fitted with water-softening equipment. • Use a biodegradable and pH neutral detergent for heavy surface dirt or staining, cleaning using a non-abrasive sponge, rinsing thoroughly with plenty of fresh water • Rinse carefully with fresh water and wipe dry with a chamois leather or similar. • Once you have finished washing the boat, dry it as quickly as possible to prevent water marks, paying attention to areas such...
Open the catalog to page 3Boero Bartolomeo S.p.A. Via G. Macaggi, 19 - 16121 Genova - Italy Tel. +39 010 5500.1 - Fax +39 010 5500.291 www.boeroyachtcoatings.com - [email protected]
Open the catalog to page 46 Pages
3 Pages
29 Pages
15 Pages
2 Pages
3 Pages
4 Pages
4 Pages
6 Pages
3 Pages
24 Pages
2 Pages
5 Pages
4 Pages
13 Pages
56 Pages
6 Pages