2024 TECHNICAL PRODUCT CATALOGUE

2024 BOERO YACHTCOATINGS TECHNICAL PRODUCT CATALOGUE TECHNICAL SALES SUPPORT BOERO YACHTCOATINGS PREFERRED SUPPLIER HIGH QUALITY PRODUCT FOR ALL AREAS OF THE YACHT DEDICATED TEAM TO SUPPORT THE BOERO LIFECYCLE OTHER PRODUCTS Attention: For the list of products that are available in your country, please contact our local Boero office or sales contacts for more information.

2024 BOERO YACHTCOATINGS TECHNICAL PRODUCT CATALOGUE DEFENDER, MISTRAL FONDO ANCHORGUARD * Refer to the online document (LAUNCH AND TRANSPORT) on boeroyachtocoating.com for the different times (LAUNCH TIME AND AF TRANSPORT) High-performance hard copper-based antifouling providing excellent protection for up to 12 months. Formulated for professional use. White is the only colour suitable for aluminium hulls. Spray (PROF), Roller, Brush RINA, LLOYD'S REGISTER ANTI-FOULING SEASON 952 EXTRA Quality hard anti-fouling for seasonal protection. Provides protection in all types of water. Formulated for...

2024 BOERO YACHTCOATINGS TECHNICAL PRODUCT CATALOGUE IDROTECH ANTIFOULING ORION EXTRA High-quality copper-based self-polishing anti-fouling providing protection for up to 12 months. Recommended for sailing and motor boats up to 25 knots. For professional and DIY use. White is the only colour suitable for aluminium hulls. High-quality, brightly coloured ablative self-polishing. The new formulation allows application on all types of surfaces including aluminium (all colours); it is suitable for all types of vessels with speeds up to 35 knots. For professional and DIY use. Water-based hard-matrix...

2024 BOERO YACHTCOATINGS TECHNICAL PRODUCT CATALOGUE EPOTAR FREE Multi-surface two component epoxy primer with high anticorrosive strength. Used as an anchoring coat on difficult surfaces such as aluminium, fibreglass, steel, wood. It provides a strong bond to the substrate and exceptional adhesion of the subsequent coating system. It is easy to sand and is recommended as a primer for both above and below the waterline. 001 White COLOURS AND CAN SIZES Two component, high-build anti-corrosive epoxy coating containing aluminium pigments, specially designed for superior protection of metal surfaces....

2024 BOERO YACHTCOATINGS TECHNICAL PRODUCT CATALOGUE Two component superlightweight epoxy filler. Easily applied in both hot and cold climates, the solvent free formulation can achieve high film thicknesses in a single pass with no sagging or shrinkage during curing. Can be easily sanded. Suitable for both steel and aluminium surfaces. Low weight two component epoxy filler suitable for use on all types of vessel. Can be applied to any surface after suitable priming, resulting in perfectly uniform surfaces. Easy to mix, work and sand to achieve excellent aesthetic results. Can be mixed with mechanical...

2024 BOERO YACHTCOATINGS TECHNICAL PRODUCT CATALOGUE EPOSPRAY HIGH BUILDING Two component high solids, high-build epoxy primer. Has excellent adhesion characteristics and sanding properties, allowing surfaces suitable for the application of subsequent coats of epoxy or polyurethane primers to be readily achieved. Use of EPOSPRAY, particularly in schemes with dark finishes, will enhance the final results. Direct application by spray only to EPOYACHT, EPOLIGHT or EPOMAR. Two component, high-build epoxy base coat for epoxy and polyurethane systems. Suitable for use over prepared substrates both...

2024 BOERO YACHTCOATINGS TECHNICAL PRODUCT CATALOGUE COLOURS AND CAN SIZES RECOMMENDED DRY FILM THICKNESS (DFT) PER COAT BOERO FRESH WATER EU High gloss, two component polyurethane enamel with exceptional resistance to UV exposure and the harsh marine environment. FUTURA has been formulated to withstand the rigours of use on the topsides of a boat, benefitting from excellent resistance to abrasion and cleaning. One component polyurethane gloss enamel designed for use on boats. Resistant to weathering and abrasion. Can be applied, after appropriate preparation, on all substrates. Easy to apply...

2024 BOERO YACHTCOATINGS TECHNICAL PRODUCT CATALOGUE COLOURS AND CAN SIZES RECOMMENDED DRY FILM THICKNESS (DFT) PER COAT SMALTO POLIURETANICO BOERO GREY WATER Multi-purpose two component polyurethane enamel for use on exterior, interior, engine room, masts, etc. Thanks to its special formulation it does not yellow over time. It is used as a finish on pure or modified epoxy coatings when high stability against weathering is required. Modified two component epoxy coating, providing excellent resistance to chemicals and solvents. Specifically designed to protect waste water tanks. Alkyd finish for...

2024 BOERO YACHTCOATINGS TECHNICAL PRODUCT CATALOGUE RECOMMENDED DRY FILM THICKNESS (DFT) PER COAT CHALLENGER PRO SPECIAL EFFECTS CHALLENGER PRO CLEAR MATT Two component polyacrylic matt finish, formulated for application to special interior areas of vessels (ceilings, interior decks, etc.), and exterior surfaces (HI-TECH boats). It possesses outstanding resistance to U.V. degradation and the harsh marine environment. It is available in two colours white and black - and also in various shades of white and grey on request. Two component polyacrylic topcoat specifically designed for an excellent...

2024 BOERO YACHTCOATINGS TECHNICAL PRODUCT CATALOGUE HARDENER PRO CLEAR & TOPCOAT Hardener for Challenger Pro, solid and SE base coats. Hardener for Challenger Pro Brush. Hardener for Challenger PRO Clear/Clear Matt and Challenger PRO P673 when applied to large surfaces. Thinner for ambient temperature. THINNER PRO ULTRA SLOW Thinner for high temperatures. Extra slow thinner for high temperatures. Thinner for use during touchup work to shade Challenger PRO SE P675 matt base coat. DESCRIPTION BLENDING AGENT Thinner for roller and brush application. Specifically formulated to dilute the Challenger...

2024 BOERO YACHTCOATINGS TECHNICAL PRODUCT CATALOGUE Protective impregnating agent for coloured and natural wood. Penetrates into the wood, changing its appearance to the desired shade whilst protecting it from the marine environment, fungi, mould and insects. Can be used both outdoors and indoors to protect all types of wood. Two component, impregnating agent for wood. When applied, its penetration and insulation properties result in a surface that can be easily sanded and coated with one or two component pigmented or transparent finishes. For best results apply to new or bare wood. One component,...