Microprocessor-controlled device in a compact design Two RS485 interfaces with Modbus RTU communication protocol CAN bus output Customized configuration AHD-UIC is a protocol converter capturing data from external systems with Modbus RTU communication protocol. It is a microprocessor-controlled device to be fitted into a housing (cabinet, desk, ...). Two galvanically isolated RS485 interfaces can be adapted over a pluggable terminal block and forwarded to ship alarm displays via CAN bus output. AHD-UIC is part of the Boning product family and allows therefore individual customized configuration by means of a software configuration tool, data rates of up to 38.400 Baud are supported. Up to 100 Modbus data packets are cyclically determined. In doing so, the AHD-UIC acts as a bus master. The device offers automatic failure detection. Both analog and digital values can be queried. The AHD-UIC takes over complete data processing. Conversion tables are storable (i.e. from Imperial to Metric). Input data can be configured as a display or alarm value, a masking on binary level is possible. A combination of two devices (master / slave) builds a redundant system. Other variants of this device are available to support further communication protocols.

Technical Data Power supply 18...32 VDC Input interfaces 2 x RS485 - Modbus RTU Required distance to Standard magnetic compass: 50 cm compass Steering magnetic compass: 40 cm Boning Automationstechnologie GmbH & Co. KG • Am Steenover 4 • D-27777 Ganderkesee • E-Mail:[email protected] • www.boening.com JuB-1073 V5 Rev.: Mar 27th, 201 5 • The manufacturer accepts no liability for possible errors contained in descriptions and diagrams.