Power LEO (green) Fault LED (red) Supply cable Integration of external system data into AHD-SAS CAN Bus Network Adaptable external data protocols • NMEA 2000® • SAEJ1939 • Caterpillar-Engines • Cummins-Engines Special Features • Applicable as repeater unit with extented cable lenghts within AHD-SAS CAN bus network NMEA 2000® is a registered trademark of the National Marine Electronics Association Boning Automationstechnologie GmbH & Co. KG is manufacturer member of the National Marine Electronics Association The Universal CAN Converter AHD-UCC is a microcontroller-controlled unit for logging and conversion of measuring point data from communication protocols of external CAN bus networks into Boning AHD-SAS CAN bus network. By that, selected data of connected external systems can be updated and monitored continuously and visualized e.g. on graphic pages of connected colour displays. The configuration of data communication with settings for the adaptable external data protocols and the definition of required data conversions is performed by configuration software for Boning AHD-SAS network. The CAN bus networks are designed with galvanically isolation. The connection of external CAN bus networks (input) and of Boning AHD-SAS CAN bus networks (in- and output) is performed by screwable plug connectors according to DeviceNet-Standard. The power supply of device electronics is carried out by means of integrated cable connection in range of 9 - 32 V DC. The Universal CAN Converter AHD-UCC is designed with a robust aluminium casing ensuring a high degree of protection, provided with outside fixing holes for bulkhead resp. mounting plate installation.

Technical Data: • Mechanical Data: Dimension W x H x D: 140 x 82 x 44 mm • Environmental Data: Operating Temperature: -25°C ... +70°C • Electrical Data: Power Supply: 24VDC ( + 30%/-25%) • Interfaces: 2 x CAN Internal CAN Bus connec tion for Boning AHD-SAS coupling and plug acc. to DeviceNet-Standard (In-/Output) Approvals GL, RS Boning Automationstechnologie GmbH & Co. KG • Am Steenover 4 • D-27777 Ganderkesee • E-Mail: [email protected] • www.boening.com PaB-1357 V4 Rev.: Oct. 8th, 2014 • The manufacturer accepts no liability for possible errors contained in descriptions and diagrams.