The data station AHD-SAS 15 M12/RJ45 is used in alarm, monitoring and control systems for the acquisition, processing and monitoring of all kind of sensor values. All common type of sensors can directly be connected and evaluated. The communication with the system's displays (like e.g. the 8.8" color display AHD 880 TC or the 19" panel PC AHD 1219 G) for presentation the of the data is carried out via CAN bus. We offer two variants for the connection to the CAN bus: AHD-SAS 15 M12 is equipped with DeviceNet connectors; AHD-SAS 15 RJ45 provides Ethernet connectors (RJ45). The data station is equipped with 15 inputs for the acquisition of analog or binary signals. The different types of input signals like e.g. resistance (max. 3300 Ohms), voltage (max. 44 V), current (max. 25 mA), binary inputs (contact or switched voltage) and NiCrNi sensors can be configured individually for each single input channel with pluggable input modules. This ensures a high level of flexibility. Usage of non-linear sensors (e.g. for tank content measurements) is easily possible. Furthermore, additional virtual input channels can be created, whose resulting data are calculated from the inputs of multiple physical sensors, e.g. the total fuel as the sum of the contents of several tanks or the calculation of the mean value of exhaust gas temperatures from all cylinders of a Diesel engine. High flexibility by individual configuration of inputs with input modules In general, data processing and alerting are performed in Panel PCs AHD 12xx or Data Processing Stations AHD-DPU 9. In this case, the user has the advantage that he can modify system settings on a display. If no such device is in the Boning alarm, monitoring and control system, AHD-SAS 15 M12/RJ45 is configured to perform these tasks autonomously. The device is equipped with inputs for the connection to Binary Data Stations AHD-PS 15/30/47 and outputs for the connection to Relay Stations AHD-R101. The Relay Stations AHD-R101 can be used to signal alarms with e.g. horns or luminous call systems. If the device processes its data autonomously, integrated status LEDs display each input's alarm state. ii Bonmo Automationstechnologie

Input Modules Type Analog module B Analog module C Analog module E Analog module F Analog module F Analog module F Analog module G Analog module H Analog module I Analog module J Analog module K Analog module L Analog module M Analog module N Analog module O Analog module P Analog module R Analog module S Analog module T Analog module U Analog module V Input signal type: Current sensor 4 - 20 mA, 2-pole Current sensor 4 - 20 mA, 4-pole Contact, UBat+ switched Contact, potential free Contact, UBat- switched Transistor output, UBat- switched Thermo resistance sensor PT100 (up to 220°C) Thermo resistance...