Power distribution devices
6Pages

Ignition Protected Fuses & Holders Series BTFHANL BTFANL (Fuse) Amps 50 BTFHANLR (Holder) BTFHANL (Holder) FEATURES: • All metal parts are brass with tin plating • Shows a visible indication of a blown condition • This series of fuse assemblies consists of two parts: fuses and holders • Rated voltage up to 48 VDC or 125 VAC 50-60Hz • Rated current up to 500 amperes • Interrupt capacity up to 6000 ADC • Fuses and holders are sold as separate items • CNL fuses are also available • Ignition protection BTFHANLR Dimensions:inches/mm One year limited warranty against manufacturing defects...

4 Gang Fuse Holders FEATURES: • Heavy-duty black molded heat-resistant plastic base/case • Use with SFE or 3AG fuses up to 20 amps • Brass fuse clips and 8-32 nickel plated terminal screws • A common bus bar connects the hot side of the fuses for power feed • Bus bars have 8-32 screw terminals and stud terminals for power/ground main connection One year limited warranty against manufacturing defects Bocatech Inc. • 1020 NW 6th Street, Suite A • Deerfield Beach, FL 33442 • USA • 800.491.1716 • info@bocatechinc.com

All metal parts are stainless steel, nickel-plated brass, or nickel-plated copper. Item Common Bus 250 Amperes 48 Volts DC 300 Volts AC Maximum 4 x ¼” Stud Terminals Common Bus 600 Amperes 48 Volts DC 300 Volts AC Maximum 4 x ½” Studs Common Bus 150 Amperes 48 Volts DC 300 Volts AC Maximum 4 x ¼” Stud Terminals Common Bus 100 Amperes 48 Volts DC 300 Volts AC Maximum 4 x 10-24 Stud Terminals Common Bus 150 Amperes 48 Volts DC 300 Volts AC Maximum 20 x #10 Screw Terminals Common Bus 250 Amperes 48 Volts DC 300 Volts AC Maximum 12 x #10 Screw Terminals Common Bus 150 Amperes 48 Volts DC 300...

Bus Connectors Mounting Hole for #10 SCREW Mounting Hole for 1/4 screw 3/8 STUD #8 SCREW 8pt #10 STUD Mounting Hole for #10 screw 0.87” 22.23mm Mounting Hole For #8 Screw MOUNTING HOLE FOR #10 Screw MOUNTING HOLE FOR #10 SCREW 0.37” 9.53mm Mounting Hole For #6 Screw MOUNTING HOLE FOR #10 SCREW MOUNTING HOLE FOR #10 SCREW Mounting Hole for #10 screw MOUNTING HOLE FOR #10 SCREW Mounting Hole for #10 SCREW MOUNTING HOLE FOR#8 SCREW Mounting Hole for 1/4 screw All metal parts are stainless steel, nickel plated brass, or nickel plated copper. One year limited warranty against manufacturing...

Terminal Blocks Provides a Clean Way to Eliminate Splicing Clear, Insulated, Snap-on Covers on All Models BTMH-26BU (shown with clear cover fitted) • All metal parts are nickel-plated brass. • Circuit screws are 8-36 round head Phillips/slot. • All sizes mount with 2 #10 screws. • Covers are numbered providing circuit ID. • A write-on circuit card with numbers is included. • Ratings are 30ADC at 300VDC • Ratings are 25AAC at 600VDC • Base: high temperature plastic and closed underside • Operating temperature -40C° to +130°C Specifications Model One year limited warranty against...