Marine Products
16Pages

{{requestButtons}}

Catalog excerpts

Marine Products - 2

BILGE-MATE Patent Pending Electronic Bilge Pump Switch Positive Switching* BTBIMA-P The Bocatech BILGE-MATE is a solid state, automatic, electronic bilge pump switch designed to replace troublesome short-lived mechanical float switches. The BILGE-MATE has no moving parts and its all epoxy-encased electronic components use an incredible revolutionary new method of controlling bilge pumps. When the bilge water level reaches the stainless steel sensors (water must be present across both sensors to activate the switch), the pump is activated after a 20-30 second delay (designed to eliminate...

Open the catalog to page 2
Marine Products - 3

BILGE-MATE Patent Pending Easy to Install - No Mounting Positive Switching* There is no mounting with the BILGE-MATE. Simply connect the wires of the 3ft/.914m cable provided and place the BILGE-MATE into the lowest portion of the bilge to be pumped. It will operate in any position in which it lands. Because it has no moving parts, the BILGE-MATE will not jam, clog, or wear out and will NOT operate in oil or fuel. The unit works with the Bocatech Bilge Alarm, model BTHWBA, to use the BILGE-MATE as a high-water alarm system. 2 Position Switch Auto/Manual (Positive Switching) FUSE Black Red...

Open the catalog to page 3
Marine Products - 4

Digital Marine Gauge Large LED Display for 2”/50.8mm Diameter Mounting Hole BTDM2 Series Specifications: • 3 digit digital meter designed specifically for the marine industry • 2”/50.8mm diameter housing that is easily installed by a rear mounting threaded bezel • Measures DCV, ACV, DCA, ACA (amperage measured when using external shunt or C.T.) • Multicolor LED indicators with adjustable settings for quick reference • Yelllow indicates reading is too low • Red indicates reading is too high Specifications Power: One year limited warranty against manufacturing defects Bocatech Inc. • 1020 NW...

Open the catalog to page 4
Marine Products - 5

HIGH WATER BILGE ALARM With Pump Monitor! BTHBA2 Important: ABYC (H-22-7.3) “On boats with an enclosed accommodation compartment an alarm shall be installed indicating that bilge water is approaching the maximum bilge water level.” Our NEW BILGE ALARM meets their criteria perfectly! With only two buttons which function as labeled, the BTHWBA2 is easy to use and works with either electronic or mechanical bilge switches. When triggered, the built-in buzzer can be muted but the lights will continue to flash until the alarm condition is resolved. If the condition is not resolved within five...

Open the catalog to page 5
Marine Products - 6

Installation of Bilge Alarm Installation of Bilge Alarm Note: We can customize instant and/or time delay alarms, positive or negative inputs, and alert patterns Bilge Alarm Input #1 can be used to monitor bilge pgmp operation. If pgmp nuns for longer than 5 [we can customize this number) minutes, the unit wil' sound an alertr which is an early indication of failure due to a faulty float switch, inefficient pump, pump not running (voltage is present], or dogged pump line. This early warning can save you lots of time, ?nergyJ and money before it's too late! Bilge pump with standard float...

Open the catalog to page 6
Marine Products - 7

STA ALIVE MODEL: BTSTAA Features: • Prevents live bait from dying in bait wells due to the lack of oxygen • Keeps your catch alive during tournaments • Prevents batteries from going dead due to the constant drain of bait well pump systems • Provides an optimum cycle time of approx. 2 minutes on, 2 minutes off • Capable of handling any pump up to 15 Amps at 36VDC • Solid-state electronic circuitry, hermetically sealed in a special epoxy compound designed to provide years of completely maintenance-free operation Turn on your Baitwell pump and forget it! The Sta-Alive has no moving parts and...

Open the catalog to page 7
Marine Products - 8

Fail Safe Galvanic Isolators Ignition Protected Our Fail Safe Galvanic Isolators meet ABYC A-28 standards for continuous safety in the event of compromised grounding on board ship while connected to AC shore power. They also provide excellent galvanic corrosion protection against costly metal loss. Voltage Rating: Voltage Rating: Frequency Rating: Frequency Rating: Current Rating: Current Rating: Maximum In Rush Current: Maximum In Rush Current: Operating Temperature: Operating Temperature: Gold Plated Terminations: 0.2 microns hard gold Gold Plated Terminations: 0.2 microns hard gold...

Open the catalog to page 8
Marine Products - 9

Battery Voltage Monitors Monitor your systems quickly and accurately with these easy-to-read volt meters. They feature a 3-position battery selector switch for multiple battery banks and are ignition protected, making them safe for installation aboard gasoline powered vessels. The BT-3BDVM has a 4 digit blue LED display and the BT-3BAVM an optional backlight. Specifications Meter supply voltage: 8-16VDC Input range: 0-30VDC Accuracy (full scale): 0.1% (± 1 count) 5¼”L x 3¾”H Dimensions: 127mm x 76.2mm Specifications Input range: Accuracy (full scale): Dimensions: One year limited warranty...

Open the catalog to page 9
Marine Products - 10

12 Volt Distribution Panel Pictured below is our standard 12 Volt DC Distribution Panel. We can build it according to your specifications, i.e. AC, DC, AC/DC types, and can include: • Optional volt and amp meters • Battery selector switch • Branch circuit breakers One year limited warranty against manufacturing defects Bocatech Inc. • 1020 NW 6» Street, Suite A* Deerfield Beach, FL 33442 • USA* 800.491.1716 • info@bocatechinc.com

Open the catalog to page 10
Marine Products - 11

Digital Panel Meters Monitor your systems quickly and accurately with these easy-to-read volt meters. The Standard model comes in 4 digit blue LED display; other colors are available. These digital panel meters all have standard 2½” (50.8mm) flush or bulkhead-mounted dimensions. Specifications Meter Supply Voltage: 8-16VDC Input Range: 0-60VDC Accuracy (Full Scale): 0.1% (± 1 count) BT-VDC DC Volt Meter Specifications Meter Supply Voltage: 8-16VDC Input Range: 0-60VDC Input Range: 500ADC Accuracy (Full Scale): 0.1% (± 1 count) BT-VADC DC Volts Amps Dual Meter One year limited warranty...

Open the catalog to page 11
Marine Products - 12

Automatic Bilge Pumps FEATURES: • Submersible • Ignition protected • High-efficiency low amp motor • No burn out when dry • Stainless steel shaft • No float switch required • 3/4” (19mm) discharge • 4 amp fuse (not included) • Removable strainer FEATURES: • Submersible • Ignition protected • High-efficiency low amp motor • No burn out when dry • Stainless steel shaft • No float switch required • 1 1/8 (28mm) discharge • 6 amp fuse (not included) • Removable strainer One year limited warranty against manufacturing defects Bocatech Inc. • 1020 NW 6th Street, Suite A • Deerfield Beach, FL...

Open the catalog to page 12

All Bocatech catalogs and brochures