SPEC SHEET PIRANHA P12 SINGLE / P12 DUAL | SURFACE MOUNT PIRANHA P12 produces a class leading 7250 Fixture Lumens, this high quality AB2 Bronze fixture offers amazing value for money and outperforms comparable priced products. Suitable for in and out of water use. • RINA Type approval • 2-Year Warranty Maximum Lamp Lumens Fixture Lumens Typical Life Expectancy Power Draw Over / Under Voltage, Over Current, Reverse Polarity protection, Active thermal protection. Hydro block technology. Fixture Profile Fixture Diameter Lens Type 3mm Optical grade high impact polymer, Guard X Coating Fixture Material AB2 Bronze (standard) or Aluminium Beam Angle Type Approval Available Colours Diamond White 6500k Cobalt Blue Dual Colour White/Blue Above & below the water-line Incredibly simple to install just one small cable entry hole and 3 mounting screws. Reverse polarity protection with in built driver technology and active thermal rollback. Attached cable length Ultra compact low profile design is perfect for all types of boats, suitable for transom and side mounting on all hull types. Mounting Type Total weight Lights are controlled via a simple on/off toggle switch off or via our IYS Control system* for MFD/Mobile devices. P12 DUAL MK11 SINGLE / DUAL COLOUR Driver Type The Piranha P12 is available as a single colour fixture in either white or blue, or as a dual colour fixture white/blue. In-line fuse holder & rated fuse, Gel connector, Inline Crimps, Heat shrink, Fixing Screws, Template and installation instructions Panel mount illuminated switch & wiring loom Control via MFD screen or mobile device All Piranha models now available in aluminium finish to suit aluminium/composite hulls vA4-010122 Registered Address: Square Rig Limited, t/a Bluefin LED Cottage Farm, Cottage Lane, Norton Juxta Twycross, Atherstone, CV9 3QH Company Registration Number: 08871451 VAT Number: 179 2690 64 T: +44 (0)1827 880450 | E: [email protected] | www.bluefinled.co

© 2014 Square Rig Ltd THIS DOCUMENT MUST NOT BE REPRODUCED IN WHOLE OR IN PART AND MUST NOT BE USED OR DISCLOSED WITHOUT THE WRITTEN AUTHORISATION OF COASTLINE LED. NO DEVIATION FROM THIS DRAWING IS PERMISSABLE WITHOUT WRITTEN AUTHORISATION FROM COASTLINE LED. MOUNTING HOLES 98mm PCD MOUNTING SCREWS NO. 6X25MM THIRD ANGLE PROJECTION OVER VOLTAGE, CURRENT & REVERSE POLARITY PROTECTION WITH INBUILT ACTIVE THERMAL CONTROL SPECIFICATION 7250 FIXTURE LUMENS WATTAGE 55 No. LEDs 12 I @ 12V 4.6 I @ 24V 2.35 BEAM ANGLE 60 DEG FWHM LIGHT DIAMTER 110mm 4.33" HEAD HEIGHT 17.6mm 0.96" OVERALL LENGTH 30mm...