SPEC SHEET DRIVE LIGHTS P3 / P6 | SURFACE MOUNT P3/P6 Drive Lights are suitable for bow lights to assist docking, masts & spreaders, utility lights, engine/locker areas or any other above water use. Typical Life Expectancy Power Draw Over / Under Voltage, Over Current, Reverse Polarity protection, Active thermal protection. Hydro block technology 17.6mm Fixture Diameter Lens Type 3mm Optical grade high impact polymer, Guard X Coating Fixture Material Marine grade Aluminium Beam Angle Type Approval Available Colours Driver Type Diamond White Bow Lights, Spreader lights, Utility Lights or Engine/Locker spaces. For use above the water line. Integral Total weight Attached cable length In-line fuse holder & rated fuse, Gel connector, Inline Crimps, Heat shrink, Fixing Screws, Template and installation instructions • RINA Type approval • 2-Year Warranty Mounting Type Fixture Profile Incredibly simple to install just one small cable entry hole and 3 mounting screws. Fixture Lumens Compact & low profile design. Control via MFD screen or mobile device Registered Address: Square Rig Limited, t/a Bluefin LED Cottage Farm, Cottage Lane, Norton Juxta Twycross, Atherstone, CV9 3QH Company Registration Number: 08871451 VAT Number: 179 2690 64 T: +44 (0)1827 880450 | E: [email protected] | www.bluefinled.co

© 2014 Square Rig Ltd THIS DOCUMENT MUST NOT BE REPRODUCED IN WHOLE OR IN PART AND MUST NOT BE USED OR DISCLOSED WITHOUT THE WRITTEN AUTHORISATION OF COASTLINE LED. NO DEVIATION FROM THIS DRAWING IS PERMISSABLE WITHOUT WRITTEN AUTHORISATION FROM COASTLINE LED. THIRD ANGLE PROJECTION MARINE AB2 BRONZE & POLYMER LENS SPECIFICATIONS 1000 / 500 FIXTURE LUMENS WATTAGE 20 3 No. LEDs I @ 12V 1.2 I @ 24V N/A BEAM ANGLE 60 Deg FWHM LIGHT DIA 95mm 3.74" HEAD HEIGHT 17.6mm 0.96" OVERALL LENGTH 33.1mm 1.3" MOUNT HOLE PCD 82mm 3.22" HULL CUTOUT DIA 13mm 0.51" APERTURE 56mm 2.2" WEIGHT 400gm 13mm MINIMUM HOLE...