Btuefin LED SPEC SHEET MAKO M12 I thru-hull interchangeable The ultra compact design of the MAKO M12 Interchangeable Flush Mount offers unrivalled performance producing 7000 Fixture Lumens with almost unlimited mounting options thanks to the low profile bezel and short body design. Thru Hull mounting provides a safe and secure fixing with the added benefit of a removable LED cartridge that can be serviced or upgraded from inside the hull eliminating the need to haul the boat. Simple installation thanks to our inbuilt driver technology, just two wires to connect saving time and money in labour fees, reverse polarity protection with active thermal trip. Suitable for transom, side and under hull mounting on all types of hull. • RINA Type approval • 2-Year Warranty SPECIFICATION Mounting Type Hole cut out size Maximum Lamp Lumens Fixture Lumens Max Wattage Typical Life Expectancy Voltage Power Draw Protection Fixture Profile Fixture Diameter Lens Type Fixture Material Beam Angle Warranty Type Approval Available Colours Suitable Use Spacing Driver Type Total weight Attached cable length Included in box MAKO M12 SINGLE COLOUR Thru-Hull Interchangable 63mm 9100 7000 70 Watts 50,000 hours 12 or 24v 5.1 Amps @ 12v / 2.6 Amps @ 24v Over / Under Voltage, Over Current, Reverse Polarity protection, Thermal protection. 4mm 85mm Optical grade 8mm Borosilicate glass with Guard X coating AB2 Bronze with aluminium light engine cartridge 60 Degree 2 year RINA IEC 60529 Diamond White 6500k Cobalt Blue Below the water-line only 1.2 - 2mtr Integral 1.5 kg 2 mtr Over-moulded In-line fuse holder & rated fuse, Gel connector, Inline Crimps, Heat shrink, Fixing Screws, Template and installation instructions ACCESSORIES (OPTIONAL) Junction Box 4 Way IP68 Wiring Junction Box Delrin Sleeve Isolating kit for steel, aluminium and carbon fibre hulls 220/110v Power Supply Power supply 24v BL-Switch Panel mount illuminated switch & wiring loom I.Y.S Lighting Control Control via MFD screen or mobile device Registered Address: Square Rig Limited, t/a Bluefin LED Company Registration Number: 08871451 VAT Number: 179 2690 64 Cottage Farm, Cottage Lane, Norton Juxta Twycross, Atherstone, CV9 3QH T: +44 (0)1827 880450 | E: [email protected] | www.bluefinled.com

LENS: 8mm BOROSILICATE WITH ANTI STICK COATING D FIXTURE LUMENS WATTAGE CURRENT SPACE REQ'D FOR LIGHT ENGINE REMOVAL No. LEDs BEAM ANGLE LIGHT DIA LIGHT HEAD HEIGHT LIGHT OVERALL LENGTH INC CABLE GLAND MOUNTING HOLE PCD HULL CUTOUT DIA LIGHT APERTURE WEIGHT LENS LOCKING BOLTS - TIGHTEN SEQUENTIALLY ALLOW MIN 25mm ADDITIONAL FOR CABLE BEND RADIUS THIRD ANGLE PROJECTION INTERCHANGABLE LIGHT ENGINE PERMISSABLE WITHOUT WRITTEN AUTHORISATION FROM COASTLINE LED. AUTHORISATION OF COASTLINE LED. NO DEVIATION FROM THIS DRAWING IS PART AND MUST NOT BE USED OR DISCLOSED WITHOUT THE WRITTEN © 2014 Square...