ML Solenoid
ML Solenoid
- 500 Ampere continuous rating with magnetic latching for reliable operation.
- Manual override knob for safety, allowing ON-OFF control with or without power, and a LOCKED OFF capability for servicing.
- LED output for remote switch state indication (optional LED required).
- Tin-plated copper studs and silver alloy contacts for maximum conductivity and corrosion resistance.
- Label recesses for circuit identification.
- Cranking Rating: 2,500 Amps for 10 seconds.
- Intermittent and Continuous Ratings: Detailed in the ratings table.
- Switching Cycles: 100,000 cycles with live current switching at 300A @ 12V DC for 10,000 cycles.
- Control Circuit Voltage: 10.1 to 16.5V DC for 12V models, 20.2 to 32.9V DC for 24V models.
- Operating Temperature Range: -10°C to 50°C.
- Weight: 1.75 lb (0.79 kg).
- Meets ISO 8846 and UL 1500 external ignition protection requirements.
- IP67 and IP66 ratings for water resistance.
- E marked for compliance.
Catalog excerpts
ML-RBS REMOTE BATTERY SWITCHES 500 AMP MAGNETIC LATCHING (BI-STABLE) SWITCH PROVIDES HIGH-AMP SWITCHING UNDER LOAD, MANUALLY OR FROM REMOTE LOCATIONS 500 Ampere continuous rating Magnetic Latching (ML) Manual override knob provides an added level of safety allowing manual ON-OFF control with or without power while offering LOCKED OFF capability for servicing the electrical system LED output to remotely indicate switch state (requires optional LED) Tin-plated copper studs for maximum conductivity and corrosion resistance Silver alloy contacts provide high reliability for switching live loads Label recesses for circuit identication Included with retail packaged unit ML-Series Remote Control Contura Switch Stripped Wire Cable End provided on retail packaged units provided on bulk packaged units. Other connector plugs are available for high volume OEM applications Remote Battery Switch PN Control Switch Included Stripped Wire Stripped Wire Auto Releasing Auto Releasing Auto Releasing Auto Releasing Stripped Wire Scan for additional product information Master Control Switch Capability Amperage Operating Current when OFF/ON ML-Coil Function LINK BUS PN 9160 for easy connection to the ML-Series Automatic Charging Relay Multi-Station Switching Capability Coil Volts Amperage Operating Current when Changing State Stripped Wire * Although a SPST switch may be used, use of a SPDT switch improves immunity to inadvertent switching if the control switch becomes damp. ** @ 25°C nominal voltage
Open the catalog to page 1
REMOTE BATTERY SWITCH REMOTE BATTERY SWITCH Typical Installation Diagram with Remote Control Contura Switch (PN 2145) See Ratings table below Continuous Rating See Ratings table below Switching Cycles Live Current Switching Mechanical Endurance Control Circuit Voltage ML-RBS REMOTE BATTERY SWITCH Momentary SPDT (ON)-OFF-(ON) START BATTERY Terminal Stud Size Recommended Ring Terminal Maximum Terminal Stud Torque Operating Temperature Range Amperage Operating Current (When Changing State) 7700 and 7712 +VDC, TO OPEN (ORG) +VDC, TO CLOSE (BRN) Amperage Operating Current (Open and Combined) <13mA*...
Open the catalog to page 2All Blue Sea catalogs and brochures
BLUE SEA SYSTEMS 2017164 Pages
BLUE SEA SYSTEMS156 Pages
Blue sea system 2014134 Pages
ML-ACR Automatic2 Pages
BatteryLink?2 Pages
Deckhand Dimmer1 Page
P12 Battery Charger4 Pages
Battery boxes2 Pages
- Boat indicator
- Analog indicator
- Taylor Made boat control panel
- Boat switch
- Boat charger
- Boat switch panel
- Digital indicator
- Electrical circuit switch
- Current switch panel
- Boat selector
- Tank indicator
- Current selector
- Boat circuit breaker
- Waterproof switch panel
- Selector battery switch
- Boat relay
- Smart charger
- USB socket
- Boat USB socket