PN - PENETRATOR

PN - PENETRATOR

PN - PENETRATOR

Product catalog summary
Overview: The document provides technical specifications for the Penetrator (PN) product, detailing dimensions, materials, electrical characteristics, and ordering information.
Specifications:
  • Dimensions: Two sizes are available, Size B and Size C, with specific measurements for dimensions A, B, C, D, and E.
  • Materials: O-Rings are made of Nitrile, and threaded inserts are available in 316 Stainless or Titanium.
  • Electrical Characteristics: Maximum current is 15A, and maximum voltage is 600V. Insulation resistance is greater than 250 megaohms, and contact resistance is less than 0.01 ohm.
  • Temperature and Pressure: Operational temperature ranges from -8°C to +70°C, and the depth rating is greater than 700 bar.
Ordering Information:
  • Ordering numbers are based on size and number of conductors, with options for right-angled configurations.
  • Examples include "PN-B6" for a B size with 6 wires and "PN-C4-RA" for a C size with 4 wires that is right-angled.
Cable Diameter and Current:
  • The document lists cable outer diameters and current ratings for configurations with 2 to 8 wires, noting that additional configurations are available upon request.
Contact Information: The document provides contact details for Birns Aquamate, including address, email, phone, and fax numbers.
Note: Specifications are subject to change without notice.
See more

Catalog excerpts

PN - PENETRATOR-1

PN Data Table Dim. A [mm] Dim. B [mm] Dim. C [mm] Dim. D [mm] Dim. E [mm] O-Ring [material: Nitrile] Thread Ordering number Ordering number for “Right Angle” Not: # stands for number of conductors Examples: For B size with 6 wires: “PN-B6” For C size with 4 wires that is right angled: “PN-C4-RA” 122 Waltham St, Pawtucket, RI 02860 [email protected] March 1, 2014 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

 Open the catalog to page 1
PN - PENETRATOR-2

Max Current Max Voltage Insulation Contacts Temperature Depth Number of wires Cable OD [mm] Current [A] Note: Material Low Carbon Neoprene 316 Stainless, Titanium AWG 18 (0.82 mm2) 16/30 stranding AWG 20, AWG 16 also available upon request 122 Waltham St, Pawtucket, RI 02860 [email protected] March 1, 2014 Molding Threaded Insert In-line cable SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.