Catalogs >
Beta Marine >
Beta 120 Inland Waterways

Beta 120 Inland Waterways
1Pages

Catalog excerpts

6 Cylinders - 6.7 litre - 120bhp max at 2,600 rev/min - 670Kg Standard Specification The Beta 120 has been specially developed for commercial Fishing Boats, Launches, Wide Beamers and Dutch Barges. It is a heavy duty - 6 cylinder - naturally aspirated - direct injection - marine propulsion diesel engine. Its outstanding asset is the slow speed / high torque of 440Nm developed at 1400 rev/min from an engine of solid construction that is not only smooth and quiet but also economic with direct injection. Conforms with all current RCD '94/25/EC as amended by 2003/44/EC' emission regulations. Standard Control Panel - AB BETA MARINE Beta Marine - Beta 120 - 6 cylinder, naturally aspirated, diesel propulsion engine developing 120 bhp at 2,600 rpm with a swept volume of 6.7 litre (Recreational Craft Directive emission compliant). The engine is supplied complete with a keel cooled header tank, water cooled exhaust manifold, calorifier connections, 2V2" DSP male dry exhaust outlet, fresh water pump, injection bend, mechanical fuel lift pump, fuel and oil filters, sump pump, flywheel housing, special quiet air intake filter, 12 Volt starter, 90 Amp battery charging alternator, shutdown solenoid, control panel "AB" (with tachometer/hour recorder, keystart switch and pushbutton stop, warning lights and alarm buzzer for low oil pressure, high water temperature, no charge, and power on); a 3m interconnection cable with multi pin plug and socket to engine harness. Gearbox with nominal 2:1 reduction, heavy duty engine feet with flexible mountings, "Morse" type end fittings for speed and gear control, engine test certificate, operators manual. 'Peacock Blue' paint, packed on skid base and fully warranted by Beta Standard Features • Reliable keel cooled, naturally aspirated, direct injection diesel engine, based upon a Ford IVECO block. • Cast iron cylinder head and block and sea water pump. • PRM gearboxes with in-line, "down angle", or Vee-drive solutions. Output rotation is clockwise in ahead viewed from gearbox end. • Heavy duty power take off to drive auxiliary equipment. Optional Extras • Special engine feet to suit your installation requirements. • Keel cooling. 12 Volt - 120 Amp, or 24 Volt 70Amp alternators available. Control Panels B or C with gauges and alarms. Detailed engine drawings, brochures and manuals available under "Downloads" ----- Beta Marine Limited, Davy Way, Waterwells, Quedgeley, Gloucester GL2 2AD, U.K.

Open the catalog to page 1