Teak tr. 10/10 Marine Plywood is characterized by an excellent durability and a high mechanical resistance, despite its low weight. This plywood panel, RINA approved (RINA certified n° DIP275410CS), glued by phenolic or melamine resin, is constructed with Teak sliced cut veneer and Okoumé, or Mahogany rotary cut veneer core. This product is specific for boatbuilding, considering also the extreme conditions of its applications (excellent durability in environments with a high level of humidity, also saline). The phenolic or melamine gluing and Okoumè or Mahogany veneer, are suitable for exterior applications; in boatyards the Teak tr. 10/10 Marine Plywood is widely used in deck. Norm UNIT Panel thickness Wood species Surface weight Standard sizes Bending strenght Long grain Cross grain Long grain Cross grain Thermal conductivity Tranciato esterno in TEAK, interno Okoumè o Mogano dr. Size tollerances in according to EN 315 On demand it is possible to evaluate panels production with tight range of tolerance in thickness. The information contained in this technical data sheet is given as a pure indication and can be modified without prior notice. The purchases is responsible for verifying the product's adequacy to the end uses and for making sure that the use's place and criteria comply with the Manufacturer's prescriptions and with the laws Bellotti S pA Società Impersonale soggetta a direzione e coordinamento della Laribell S.r.l. - Reg. Imp. Trio. Monza N. 03703650154 - R E A. MI 864203 - REA CO 225267 - Estero M1127627 - Sede Legale: Via Trento, 68 - 20821 Meda (MB)