TEAK MARINE PLYWOOD

Product catalog summary

Specifications:
The document outlines the specifications of Teak Marine Plywood, which is RINA certified and constructed using Okoumé or Mahogany rotary cut veneers overlaid with Teak Sliced cut veneer. The panel thickness ranges from 8 mm to 20 mm, with corresponding layers from 3 to 9. Surface weight varies from 5.2 kg/m² to 13 kg/m². The bonding quality is classified under EN 314-2 Class 3.

Mechanical Properties:
Bending strength and E-Modulus are provided for both long grain and cross grain directions, with values decreasing as panel thickness increases. For example, bending strength in the long grain direction ranges from 51 MPa to 37 MPa, while in the cross grain direction it ranges from 5 MPa to 23 MPa.

Thermal Conductivity:
The thermal conductivity is specified as 0.15 W/(m·K).

Standard Sizes:
The plywood is available in standard sizes of 2500x1220 mm, 3100x1220 mm, 2500x1530 mm, and 3100x1530 mm.

Applications:
This product is specifically designed for boatbuilding, offering excellent durability and high mechanical resistance in environments with high humidity and salinity. It is suitable for exterior applications due to its phenolic or melamine gluing and the use of Okoumé or Mahogany veneers.

Manufacturer Information:
Bellotti S.p.a., located in Cermenate, Italy, is the manufacturer. Contact details include a phone number, fax, and website.

Notes:
The data provided are indicative and subject to change without notice. It is the purchaser's responsibility to ensure the product's suitability for their application and compliance with handling, transportation, and usage requirements.

Catalog excerpts

TEAK MARINE PLYWOOD This plywood panel is RINA certified, glued by phenolic or melammine resin, and built of Okoumé or Mahogany rotary cut veneers plywood overlaid by Teak Sliced cut veneer 26/10 thick. It is characterized by an excellent durability and high mechanical resistance, in spite of its low weight This product is specific for boatbuilding, considering also the extreme conditions of its applications (excellent durability in environments with a high level of humidity and salinity). The phenolic or melamine gluing and Okoumé or Mahogany veneers, are suitable for exterior applications; Teak tr. 26/10 Marine Plywood is widely used for decking Panel thickness Surface weight Bonding Quality Bending strenght Long grain Bending strenght Cross grain E-Modulus Long grain E-Modulus Cross grain Thermal Conductivity Standard sizes Bellotti s.p.a. Via S. Francesco, 1 22072 Cermenate (CO) Italy T +39 031777222 F +39 031771148 www.bellottispa.com [email protected] Nota: I dati qui sopra riportati sono da considerarsi indicativi e suscettibili di variazioni sensa preavviso, E' responsabilità dell'acquirente determinare che i prodotti Bellotti siano idonei alle applicazioni desiderate ed è altresì responsabile del fatto che le modalità di movimentazione, trasporto, deposito ed impiego siano conformi alle indicazioni del fabbricante e alle prescrizioni della normativa vigente. Note: Above data are to be considered for information only and subject to modifications without notice. It is up to purchaser estabilish that Bellotti Products are suitable to selected application or installation and ensure that ways of handling, transportation ed usage are compliiant to Manufacturer's requirements and applicable legislation

Open the catalog to page 1

All BELLOTTI SPA catalogs and brochures

Archived catalogs

Catalogue nautic
9 Pages
LARIPHON LARICROSS
1 Page