*mynauticexpo

Lariphon®

Product catalog summary

Specifications:
The document provides specifications for a composite panel made of Okoumé Plywood with RubberCork Core, known for its high sound insulation properties. The nominal thicknesses available are 11 mm, 15 mm, 19 mm, and 23 mm, with corresponding compositions of 4-3-4 mm, 6-3-6 mm, 8-3-8 mm, and 10-3-10 mm. Surface weights range from 6.5 kg/m² to 12.5 kg/m².

Bonding Quality and Strength:
The bonding quality is classified as Class 3 according to EN 314-2. Bending strength and E-Modulus are provided for both long-grain and cross-grain orientations, with values decreasing as thickness increases.

Sound and Thermal Properties:
The panel offers airborne sound insulation of 29 to 31 dB and thermal transmittance values from 10.2 to 5.3 W/(m²·K), depending on thickness.

Standard Sizes:
Standard panel sizes are 2480x1200 mm and 3080x1510 mm, with special sizes available on demand.

Applications:
LARIPHON® panels are suitable for furnishings, bulkheads, ceilings, and floorings, and can be installed vertically or horizontally. Sound insulation can be enhanced with antidecoupling bars.

Manufacturing and Compliance:
The product is manufactured in Italy, ensuring formaldehyde emissions lower than E1-EN 13986 standards. Purchasers are responsible for ensuring product suitability and compliance with handling, transportation, and usage regulations.

Contact Information:
Bellotti s.p.a., Via S. Francesco, 1, 22072 Cermenate (CO) Italy. Phone: +39 031777222, Fax: +39 031771148, Website: www.bellottispa.com, Email: [email protected].

Disclaimer:
The data provided is indicative and subject to change without notice. It is the purchaser's responsibility to verify product suitability and compliance with applicable legislation.

Catalog excerpts

SOUND INSULATION Composite Panel with high sound insulation properties made of Okoumé Plywood Faces and RubberCork Core. Processing cycle ensure for lower than E1-EN 13986 Formaldehyde Emission. Product entirely manufactured in Italy Nominal Thickness Surface Weight Bending Strength Long-Grain Bending Strength Cross-Grain E-Modulus Long-Grain E-Modulus Cross-Grain Okoumé Plywood Bonding Quality Airborne Sound Insulation Thermal Transmittance STANDARD SIZES (*) (*) Special Sizes can be evaluated on demand APPLICATIONS LARIPHON® is suitable for manufacturing of furnishings, bulkheads, ceilings and floorings. It can be installed either in vertical or horizontal position where its natural sound insulation properties can be improved by coupling with antidecoupling bars Bellotti s.p.a. Via S. Francesco, 1 22072 Cermenate (CO) Italy T +39 031777222 F +39 031771148 www.bellottispa.com [email protected] Nota: I dati qui sopra riportati sono da considerarsi indicativi e suscettibili di variazioni sensa preavviso, E' responsabil ità dell'acquirente determinare che i prodotti Bellotti siano idonei alle applicazioni desiderate ed è altresì responsabile del f atto che le modalità di movimentazione, trasporto, deposito ed impiego siano conformi alle indicazioni del fabbricante e alle p rescrizioni della normativa vigente. Note: Above data are to be considered for information only and subject to modifications without notice. It is up to purchaser estabilish that Bellotti Products are suitable to selected application or installation and ensure that ways of handling, transportation ed usage are compliiant to Manufacturer's requirements and applicable legislation

Open the catalog to page 1

All BELLOTTI SPA catalogs and brochures

Archived catalogs

Catalogue nautic
9 Pages
LARIPHON LARICROSS
1 Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list