SOUND INSULATION Lightweight Composite Panel with Natural Cork Insert. Suitable when high durability and lightweight is requested in addition to acoustic and thermal performance. Panels can be supplied with several surface finishing like veneering by natural or reconstituted wood as well as bonded to HPL sheets. Processing cycle ensure for lower than E1-EN 13986 Formaldehyde Emission. Product entirely manufactured in Italy THERMAL INSULATION Nominal Thickness Surface Weight Bending Strength Long-Grain Bending Strength Cross-Grain E-Modulus Long-Grain E-Modulus Cross-Grain Thermal Transmittance Okoumé Plywood Bonding Quality STANDARD SIZES (*) (*) Special Sizes can be evaluated on demand APPLICATIONS Typical end use of LARIMAR® SG is the production of furniture as well as bulkheads Bellotti s.p.a. Via S. Francesco, 1 22072 Cermenate (CO) Italy T +39 031777222 F +39 031771148 www.bellottispa.com [email protected] Nota: I dati qui sopra riportati sono da considerarsi indicativi e suscettibili di variazioni sensa preavviso, E' responsabilità dell'acquirente determinare che i prodotti Bellotti siano idonei alle applicazioni desiderate ed è altresì responsabile del f tto che le modalità di movimentazione, trasporto, deposito ed impiego siano conformi alle indicazioni del fabbricante e alle prescrizioni della normativa vigente. a Note: Above data are to be considered for information only and subject to modifications without notice. It is up to purchaser estabilish that Bellotti Products are suitable to selected application or installation and ensure that ways of handling, transportation ed usage are compliiant to Manufacturer's requirements and applicable legislation