LARIMAR® P80

Product catalog summary

Specifications:
The document provides specifications for a composite panel with a polypropylene honeycomb core and Okoumé plywood outer faces. The nominal thicknesses available are 14 mm, 16 mm, 18 mm, and 21 mm, with corresponding compositions and surface weights. The bonding quality is classified as EN 314-2 Class 3 for all thicknesses. Bending strength and E-Modulus values are provided for both long-grain and cross-grain orientations, measured according to EN 310 standards. Thermal transmittance values are also listed, following UNI EN ISO 6946 standards.

Standard Sizes:
The standard size for the panels is 2420x1180 mm. Special formats can be evaluated upon request.

Applications:
The LARIMAR® P80 panels are typically used in the production of furniture and bulkheads.

Additional Information:
The panels are noted for their high durability and low weight. They can be supplied with various surface finishes, including natural or reconstituted wood veneering and bonding to HPL sheets. The processing cycle ensures formaldehyde emissions lower than E1-EN 13986 standards. The product is entirely manufactured in Italy.

Manufacturer Details:
Bellotti s.p.a., located in Cermenate, Italy, is the manufacturer. Contact information includes a phone number, fax, website, and email address.

Disclaimer:
The data provided are indicative and subject to change without notice. It is the purchaser's responsibility to ensure the suitability of Bellotti products for their intended applications and to comply with handling, transportation, and usage guidelines as per the manufacturer's requirements and applicable legislation.

Catalog excerpts

Composite Panel with Polypropilene Honeycomb Core and Okoumé Plywood outer faces. It features high durability and very low Weight. Panels can be supplied with several surface finishing like veneering by natural or reconstituted wood as well as bonded to HPL sheets. Processing cycle ensure for lower than E1-EN 13986 Formaldehyde Emission. Product entirely manufactured in Italy Nominal Thickness Surface Weight Bending Strength Long-Grain Bending Strength Cross-Grain E-Modulus Long-Grain E-Modulus Cross-Grain Thermal Transmittance Okoumé Plywood Bonding Quality STANDARD SIZES (*) (*) Formati Speciali da valutare su Richiesta APPLICATIONS Typical end use of LARIMAR® P80 is the production of furniture as well as bulkheads Bellotti s.p.a. Via S. Francesco, 1 22072 Cermenate (CO) Italy T +39 031777222 F +39 031771148 www.bellottispa.com [email protected] Nota: I dati qui sopra riportati sono da considerarsi indicativi e suscettibili di variazioni sensa preavviso, E' responsabilità dell'acquirente determinare che i prodotti Bellotti siano idonei alle applicazioni desiderate ed è altresì responsabile del f atto che le modalità di movimentazione, trasporto, deposito ed impiego siano conformi alle indicazioni del fabbricante e alle prescrizioni della normativa vigente. Note: Above data are to be considered for information only and subject to modifications without notice. It is up to purchaserestabilish that Bellotti Products are suitable to selected application or installation and ensure that ways of handling, transp ortation ed usage are compliiant to Manufacturer's requirements and applicable legislation

Open the catalog to page 1

All BELLOTTI SPA catalogs and brochures

Archived catalogs

Catalogue nautic
9 Pages
LARIPHON LARICROSS
1 Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list