IROKO MARINE PLYWOOD

Product catalog summary

Specifications:
The document provides specifications for Iroko Marine Plywood, highlighting its panel thickness, number of layers, surface weight, gluing class, bending strength, and E-Modulus for both long and cross grain directions. The panel thickness ranges from 8 mm to 20 mm, with corresponding layers from 3 to 9. Surface weight varies from 4.5 kg/m² to 10.8 kg/m². The gluing is classified under EN 314-2 Class 3, suitable for exterior applications.

Mechanical Properties:
Bending strength and E-Modulus are provided for both long and cross grain directions, with values decreasing as panel thickness increases. For example, bending strength long grain ranges from 51 MPa to 37 MPa, while cross grain ranges from 5 MPa to 23 MPa.

Thermal Transmittance:
The thermal transmittance is specified according to UNI EN 13986, with a value of 0.15 W/(m²·K).

Applications and Durability:
The plywood is characterized by excellent durability and high mechanical resistance, making it suitable for boatbuilding, especially in environments with high humidity and salinity. It is RINA type certified and constructed with Iroko and Okoumé veneers.

Standard Sizes:
The standard size for the plywood is 3100x1530 mm.

Manufacturer Information:
The product is manufactured by Bellotti S.p.a., located in Cermenate, Italy. Contact information includes a phone number, fax, and email address.

Disclaimer:
The data provided is indicative and subject to change without notice. It is the purchaser's responsibility to ensure the product's suitability for their application and compliance with handling and usage requirements.

Catalog excerpts

IROKO MARINE PLYWOOD Iroko tr. 26/10 Marine Plywood is characterized by an excellent durability and a high mechanical resistance, despite its low weight. This plywood panel, RINA type certified, glued by phenolic or melamine resin, is constructed with Iroko sliced cut veneer and Okoumé rotary cut veneer core. This product is specific for boatbuilding, considering also the extreme conditions of its applications (excellent durability in environments with a high level of humidity, also saline). The phenolic or melamine gluing and the Okoumé veneer, are suitable for exterior applications (Class 3 in according to EN 314); in boatyards the Iroko tr. 26/10 Marine Plywood is widely used in deck. Panel thickness Surfare weight Bending strenght long grain Bending strenght cross grain E-Modulus Long grain E-Modulus Cross grain Trasmittanza Termica Standard sizes Via S. Francesco, 1 22072 Cermenate (CO) Italy T +39 031777222 F +39 031771148 www.bellottispa.com [email protected] Nota: I dati qui sopra riportati sono da considerarsi indicativi e suscettibili di variazioni sensa preavviso, E' responsabilità dell'acquirente determinare che i prodotti Bellotti siano idonei alle applicazioni desiderate ed è altresì responsabile del fatto che le modalità di movimentazione, trasporto, deposito ed impiego siano conformi alle indicazioni del fabbricante e alle prescrizioni della normativa vigente. Note: Above data are to be considered for information only and subject to modifications without notice. It is up to purchaserestabilish that Bellotti Products are suitable to selected application or installation and ensure that ways of handling, transp ortation ed usage are compliiant to Manufacturer's requirements and applicable legislation

Open the catalog to page 1

All BELLOTTI SPA catalogs and brochures

Archived catalogs

Catalogue nautic
9 Pages
LARIPHON LARICROSS
1 Page