Exhibit with us
*mynauticexpo  
English
  1. Catalogs
  2. BELLOTTI SPA
  3. Igniply®
video corpo

Igniply®

Igniply®
1 / 1 PageView full catalog

Igniply®

Product catalog summary
Specifications:
The document provides specifications for Igniply, a fire-retardant plywood made from 100% Okoume with melamine gluing among veneer layers. It highlights the nominal thickness options ranging from 10 mm to 40 mm, with corresponding layers and surface weight. The bonding quality is classified as EN 314-2 Class 3, suitable for humid environments. Bending strength and E-Modulus values are provided for both long-grain and cross-grain orientations, with specific values for each thickness.

Procedures and Standards:
Igniply is CE1 marked for wall and ceiling applications and complies with IMO-MED Item 3.18c for floor covering. It features a formaldehyde emission much lower than E1-EN13986 standards. The document specifies the thermal conductivity and airborne sound insulation values, ensuring compliance with EN 13986.

Applications:
The plywood is suitable for flooring, furnishings, walls, and ceiling applications. It has a fire reaction classification of B-s2,d0 for wall and ceiling applications and 3.18c for floor covering when installed on a non-combustible support.

Recommendations:
The document advises that the data provided are indicative and subject to change without notice. It is the purchaser's responsibility to ensure the suitability of Bellotti products for their intended applications and to comply with handling, transportation, and usage requirements as per the manufacturer's guidelines and applicable legislation.

Contact Information:
Bellotti S.p.A., Via S. Francesco, 1, 22072 Cermenate (CO) Italy. Phone: +39 031777222, Fax: +39 031771148, Website: www.bellottispa.com, Email: [email protected]
See more

Catalog excerpts

Igniply®-1

Igniply® 100% Okoume Fire Retardant Plywood, Melammine gluing among Veneer Layers, Features excellent mechanical Property properties, in spite of a low weight. Thanks to a Formaldehyde emission much lower than E1Nominal Thickness EN13986 and EN 314-2 Class 3 Bonding Quality, it is suitable to be used in humid environments. Layers Igniply is CE1 marked for Walls/Ceiling Applications and accordingly to IMO-MED Item 3.18c as Floor Covering Surface Weight Bending Strength Long-Grain Bending Strength Cross-Grain E-Modulus Long-Grain E-Modulus Cross-Grain Airborne Sound Insulation Thermal Conductivity Bonding Quality Fire Reaction STANDARD SIZES (*) B-s2,d0 (Application: Wall/Ceiling; Installation: Not laid on any support) 3.18c (Application: Floor Covering; Installation: laid on non combustible support) (*) Special Sizes can be evaluated on demand APPLICATIONS Flooring, Furnishings, Walls, Ceiling Bellotti s.p.a. Via S. Francesco, 1 22072 Cermenate (CO) Italy T +39 031777222 F +39 031771148 www bellottispa com [email protected] Nota: I dati qui sopra riportati sono da considerarsi indicativi e suscettibili di variazioni sensa preavviso, E' responsabiltà dell'acquirente determinare che i prodotti Bellotti siano idonei alle applicazioni desiderate ed è altresì responsabile del f tto che le modalità di movimentazione, trasporto, deposito ed impiego siano conformi alle indicazioni del fabbricante e alle p rescrizioni della normativa vigente. i a Note: Above data are to be considered for information only and subject to modifications without notice. It is up to purchaserestabilish that Bellotti Products are suitable to selected application or installation and ensure that ways of handling, transp ortation ed usage are compliiant to Manufacturer's requirements and applicable legislat

 Open the catalog to page 1

All BELLOTTI SPA catalogs and brochures

  1. Barre ISO-T
    Barre ISO-T

    1  Page

  2. LARIMAR® P80
    LARIMAR® P80

    1  Page

  3. LARIMAR© PET
    LARIMAR© PET

    1  Page

  4. LARIMAR© 60
    LARIMAR© 60

    1  Page

  5. Lariphon® Laricross®
    Lariphon® Laricross®

    1  Page

  6. Lariphon®
    Lariphon®

    1  Page

  7. LARICROSS®
    LARICROSS®

    1  Page

  8. IROKO MARINE PLYWOOD
    IROKO MARINE PLYWOOD

    1  Page

  9. MAHOGANY SAPELLI MARINE PLYWOOD
    MAHOGANY SAPELLI MARINE PLYWOOD

    1  Page

  10. Okoumé Marine Plywood
    Okoumé Marine Plywood

    1  Page

  11. TEAK MARINE PLYWOOD
    TEAK MARINE PLYWOOD

    1  Page

  12. MAHOGANY MARINE PLYWOOD
    MAHOGANY MARINE PLYWOOD

    1  Page

  13. LARIMAR© SG
    LARIMAR© SG

    1  Page

  14. ALBASIA BLOCKBOARD FROMAGER VENEERED
    ALBASIA BLOCKBOARD FROMAGER VENEERED

    1  Page

  15. ALBASIA BLOCKBOARD OKOUMÉ VENEERED
    ALBASIA BLOCKBOARD OKOUMÉ VENEERED

    1  Page

  16. POPLAR EXTERIOR PLYWOOD
    POPLAR EXTERIOR PLYWOOD

    1  Page

  17. Okoumè Exterior Plywood
    Okoumè Exterior Plywood

    1  Page

  18. Products catalogue
    Products catalogue

    16  Pages

  19. YACHT BUILDING CATALOGUE
    YACHT BUILDING CATALOGUE

    17  Pages

  20. barre_iso
    barre_iso

    1  Page

  21. teak_tr_10_10_plywood
    teak_tr_10_10_plywood

    1  Page

  22. NOMEX® DECORETM
    NOMEX® DECORETM

    1  Page

  23. LARIMAR® BALSA
    LARIMAR® BALSA

    1  Page

  24. LARIMAR® PET PX - 100
    LARIMAR® PET PX - 100

    1  Page

  25. nomex_decore_eng
    nomex_decore_eng

    1  Page

  26. larimar_balsa_eng
    larimar_balsa_eng

    1  Page

Archived catalogs

  1. Catalogue nautic
    Catalogue nautic

    9  Pages

  2. LARIPHON LARICROSS
    LARIPHON LARICROSS

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.