RST740 ANTENNA The Active/Powered Iridium antenna RST740 is designed for Land and Maritime applications specifically for use where long cable runs are required to reach between the required antenna location and the terminal. Technical Specifications GENERAL Input Voltage DC Peak Power Draw DC RMS Standby Power Draw Active Antenna Cable Loss FREQUENCY Iridium ENVIRONMENTAL Extreme rain exposure Extreme snow exposure Where an installation exceeds 20m/60ft it becomes more cost effective to use an Active/Powered Iridium antenna that allows much thinner and cheaper cable to run up to 100m/300ft where this would never be possible with a passive Iridium antenna. The Active Antenna RST740 will work on all Beam products and any Iridium devices, however requires an approved Beam Active Antenna cable for use in order to manage the power amplification across the RF line to the antenna. KEY FEATURES • Iridium approved • High quality enclosure • Active antenna • Pole/Mast mounting • White small size/footprint • Omni directional • Supports long cable runs • Power breakout box included (required 9-32 VDC) • 12 month repair or replacement warranty Dimensions Antenna CONNECTOR Iridium Iridium Beam Active Cable Kit - 23m/75.5ft Iridium Beam Active Cable Kit - 34m/111.5ft Iridium Beam Active Cable Kit - 52m/170.6ft Iridium Beam Active Cable Kit - 75m/246.1ft Iridium Beam Active Cable Kit - 104m/341.21ft