TECHNOLOGY SOLUTIONS PRODUCTS non ampliTex® UD & ±45° bi-axial FACTS PERFORMING NATURAL FIBRE Less weight and more performance — the Bcomp ampliTex fabrics for your next-generation composites. FIBRE PROPERTIES Using highly automated processes, we control the flax yarn placement such to obtain an application-specific fibre ori- entation and fabric weight. The flax fibre quality, the yarn Density 1400 kg/m3 European Eco Superior. A local and renewable thickness and twist are all tailored depending on the re- quired mechanical properties of the final composite part. FABRIC ARCHITECTURES ampliTex ® UD flax fabric, no. 5009 ampliTex ® UD flax fabric, no. 5309 300 g/m2/ - Width 345 mm, non crimp 300 g/m2/ - Width 345 mm, non crimp impregnated according your processes/needs ampliTex ® biaxial ±45° fabric, no. 5008 All ampliTex® are non crimp for optimum stress transfer For all our products we focus on performance, sustainability and consumer acceptance. Contact us if want to test our fabrics in your application. We will optimize our fabrics to meet the structural requirements of your part. Our ampliTex product line include a large variety of flax fabrics, most of them being available as prepregs. Standard infusion-based processes (vacuum infusion, RTM), wet layup, bladder inflation moulding (BIM) or compression moulding are compatible with our products. Good compatibility with epoxy and polyester Near-zero CTE, hence good processing compatibility with carbon fibres Compatible with infusion-based processes (vacuum infusion, RTM), wet layup, bladder inflation moulding (BIM), compression moulding Bcomp Ltd. - Rte de la Fonderie 2 - CH - 1700 Fribourg - [email protected] WWW.BCOMP.CH