The B-Kool System
4Pages

The B-KOOL system Clever cost savings at the same time as protecting the environment 200 - 700 l/min 100 - 350/500 bar Up to 11 times longer life for your filter cartridges! Environmentally sound Integrated or as stand-alone version Easy to retrofit The B-KOOL refrigeration dryer from BAUER considerably reduces the running costs of the compressor whilst protecting the environment at the same time. At locations with particularly high ambient temperatures, BKOOL assures a remarkably longer life time of the filter cartridge. You will benefit from a lower cost of purchase and storage of filter cartridges, a longer uninterrupted compressor operation and a lower consumption of filter cartridges. www.bauer-kompressoren.com

BAUER KOMPRESSOREN b-kool System That is the way B-KOOL works Filter cartridges represent a major element of the operating costs of a compressor. But by using the original filter cartridges, pollutants are limited according to the breathing air standard DIN EN 120211! For the safety of the customer and the operator. The B-KOOL integrated cooling unit removes a large proportion of the humidity before it reaches the purification system. The service life of the filter cartridge is thus extended up to 11 times. 3 is evacuated from the final separator of the compressor and then fed into the...

b-kool System B-KOOL‘s benefits B-KOOL can increase the life of the filter cartridges by such an extent that the running costs almost cease to be of significance. That is why the acquisition costs of B-KOOL will pay for themselves within a short period of time. When combined with the B-SECURUS filter monitoring system1 B-KOOL gives more economical operation as the filter cartridge condition is monitored to allow its full capacity to be used before replacement. In addition to the reduced costs for new filter cartridges, other costs for stocking and storage are saved. Not least the use of...

b-kool System for the optimized use of the filter cartridge 3 integrated into the unit 2 B-KOOL 680s, allows for long filling cycles without interruption for operation in combination with B-KOOL. P 41 purifcation system P 42 purifcation system P 61 purifcation system P 81 purifcation system 1 Ex factory or retrofit | for separate installation Only ex factory, no retrofit possible 2 integrated into the unit on site Technical Data Medium: Air Power consumption: Operating temperature: Intake temperature: Maximum operating pressure: Minimum operating pressure: cylinder filling from 0 to 200 bar...