Stainless Steel Faced, Aluminium Honeycomb Panel DESCRIPTION AYRLITE® 2031 is an aluminium honeycomb panel with stainless steel sheet faces bonded to the core. A glassfibre epoxy layer is used to protect against galvanic corrosion between the stainless steel faces and the aluminium honeycomb. Strain-hardened hexagonal cell aluminium honeycomb has optimal mechanical properties and is able to carry shear loads at significantly lower weight than foams or other core types. • Meets ISO 1182 requirements for Non-Combustibility of • Wall linings aluminium honeycomb core • Internal modules eg. galleys, toilets, kiosks etc. • Aluminium honeycomb core meets the requirements of AMS-C-7438 for salt fog anti-corrosion performance FEATURES • Low weight • High stiffness • Easy to fabricate • Recyclable • Stainless Steel 304 2B, 0.55mm sheets are bonded to both faces. Other thicknesses and finishes are available, eg. 304 No 4, 0.7mm sheets • Aluminium honeycomb cell size is 6.35mm • Wide selection of AYRLITE® Profiles & Assembly Accessories are available AYRES Lightweigt Panel Systems

Stainless Steel Faced, Aluminium Honeycomb Panel PHYSICAL AND MECHANICAL PERMORMANCE Thickness Long Beam Climbing Drum Peel Flatwise Compression Typical room temperature properties for 0.55mm 304 2B Stainless Steel Sheets to both faces AVAILABILITY Standard Dimensions 2400mm x 1220mm Panel Thicknesss Made to order, minimum thickness 6mm FABRICATION AYRLITE® 2031 requires specialised stainless steel fabrication tools and techniques. Glassfibre dust is an irritant, the use of a good dust extraction system is recommended. SAFETY As with cutting operations on most materials, avoid inhalation and...