Catalogs >
Awlgrip >
Pro-Cure

Pro-Cure
2Pages

Catalog excerpts

PRODUCT DATA SHEET PRO-CURE ACCELERATOR X-98: 73014 or X-138: 73015 Features & Uses PRO-CURE Accelerators may be used to decrease dry and cure times in AWLGRIP® and AWLCRAFT® 2000 Topcoats. Do not use in primers. Specification Data Type: Accelerator additive Packaging: 2 ounce bottles/12 per case VOC: Product Components, Reducers, Additives, and Auxiliary Components PRO-CURE X-98 and PRO-CURE X-138 are additives used in AWLGRIP® and AWLCRAFT® 2000 Topcoats. Application Equipment This product is an additive component. See instructions for the primary product application. Surface Preparation This product is an additive component. See instructions for the primary product application. Mixing & Reduction PRO-CURE X-98 (73014) 1/2 liquid ounce per 2 gallons of mixed topcoat color base and converter. This is the maximum amount; lesser quantities may be sufficient. This is equivalent to 3 capfuls if measured using the screw top cap. PRO-CURE X-138 (73015) 1 liquid ounce per 2 gallons of mixed topcoat color base and converter. This is the maximum amount; lesser quantities may be sufficient. This is equivalent to 6 capfuls if measured using the screw top cap. Induction Time after Mixing: N/A Application Instructions PRO-CURE X-98 should only be used in spray applications. PRO-CURE X-138 may be used in both spray and brush applications. Recoatability: AWLGRIP® Topcoats with a full add of PROCURE X-98 may be recoated or taped in 4 to 6 hours at 77°F, 50% R.H. AWLGRIP® Topcoats with a full add of PRO-CURE X-138 may be recoated or taped in 6 to 8 hours at 77°F, 50% R.H. Do not apply paint materials to surfaces warmer than 105°F or colder than 55°F. Do not attempt to cure products at temperatures below 55°F. 2270 Morris Avenue • Union, New Jersey 07083 • USA • Tel: 908.686.1300 • Fax: 908.964.2219 Bannerlaan 54 • B-2280 Grobbendonk • Belgium • Intl. Tel: 32.14.257770 • Intl. Fax: 32.14.230880 76 Waterway Drive • Coomera • QLD 4209 • Australia • Tel: 61.7.5573.9655 or 1800.007.866 • Fax: 61.7.5573.9677 686 Rosebank Road • Avondale • Auckland • New Zealand • Tel: 64.9.828.3009 or 0800.150.527 • Fax: 64.9.828.1129 No.1 Tuas Avenue 4 • Singapore 639382 • Tel: 65.6862.2928 • Fax: 65.6862.0778 Page 1 of 2 • Rev 3 – JUNE 2011 • PRO-CURE

Open the catalog to page 1

PRODUCT DATA SHEET PRO-CURE ACCELERATOR X-98: 73014 or X-138: 73015 Spray Application* DRY TIME: The amount of time required before the applied coating can be masked and taped. APPLICATION LIFE: The amount of time required for the initial application viscosity to double. NOTE: Accelerators are not recommended above 85°F. PRO-CURE® X-98 should not be used above 75°F. Do not exceed recommended accelerator levels as this could impair performance. PRO-CURE ACCELERATOR NONE X-138: 1 liquid ounce per 2 gallons of catalyzed topcoat before adding reducer. X-98: 1/2 liquid ounce per 2 gallons of...

Open the catalog to page 2