PRODUCT DATA SHEET FLATTENING AGENT G3013 FOR AWLGRIP® or AWLCRAFT® 2000 TOPCOATS Features & Uses Flattening Agent G3013 reduces the gloss of AWLGRIP® or AWLCRAFT® 2000 Urethane Topcoats to a flat or semi-gloss finish. Preferred application is by spray. Roller application will provide more uniform gloss than brushing. AWLCRAFT® 2000 cannot be brushed or rolled. Not recommended for application to large expanses of surface as unequal gloss and appearance may result. Please note, due to a change in the formulation of Awlgrip Flattening Agent G3013, we now recommend reducer T0003 be used to achieve optimum results at temperatures of 20ºC, 68ºF or over. Specification Data Type: Inert Extender. G3013 is an additive used in urethane topcoats. Packaging: Quarts and Gallons. VOC: 502 g/l or 4.2 lbs/gallon Application Equipment This product is an additive component. See instructions for the primary product. Surface Preparation This product is an additive component. See instructions for the primary product. All trademarks mentioned in this publication are owned by, or licensed to, the AkzoNobel group of companies. ©AkzoNobel 2015 Page 1 of 2 – Revision 8 – September 2015 – Flattening Agent G3013

PRODUCT DATA SHEET FLATTENING AGENT G3013 FOR AWLGRIP® or AWLCRAFT® 2000 TOPCOATS Mixing and Reduction Thoroughly mix the color base and G3013 Flattening Agent G3013. Then stir in the G3010. When one homogenous mixture is obtained add the T0002 or T0003 Reducer. Strain mix with a 60-100 mesh cone strainer before applying. The use of T0003 will provide better spray experience and a smoother finish than T0002. Do not use T0002 at temperatures above 25°C / 77°F. AWLGRIP® Topcoat: Mixture for Flat Finish 1 part by volume AWLGRIP® Color Base 1 part by volume Flattening Agent G3013 1 part by volume...