Awlwood MA Spray Reducer
9Pages

OT0202_1 Safety Data Sheet Awlwood MA Spray Reducer Sales Order: {SalesOrd} Bulk Sales Reference No.: OT0202 1. Identification of the preparation and company 1.1. Product identifier Product Identity Awlwood MA Spray Reducer Bulk Sales Reference No. OT0202 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended Use See Technical Data Sheet. Application Method See Technical Data Sheet. 1.3. Details of the supplier of the safety data sheet Company Name Akzo Nobel Coatings International Paint LLC 2270 Morris Avenue P. O. Box 386 Emergency CHEMTREC (USA) International Paint Poison Control Center Customer Service International Paint Fax No. 2. Hazard identification of the product 2.1. Classification of the substance or mixture Flam. Liq. 3;H226 Acute Tox. 4;H312 Acute Tox. 4;H332 Skin Irrit. 2;H315 Eye Irrit. 2;H319 STOT RE 2;H373 Flammable liquid and vapor. Harmful in contact with skin. Harmful if inhaled. Causes skin irritation. Causes serious eye irritation. May cause damage to organs through prolonged or repeated exposure. Aquatic Acute 2;H401 Toxic to aquatic life. 2.2. Label elements Using the Toxicity Data listed in section 11 & 12 the product is labelled as follows. H226 Flammable liquid and vapor. H312 Harmful in contact with skin. H315 Causes skin irritation.

H319 Causes serious eye irritation. H332 Harmful if inhaled. H335 May cause respiratory irritation. H373 May cause damage to organs through prolonged or repeated exposure. H401 Toxic to aquatic life. P210 Keep away from heat / sparks / open flames / hot surfaces - No smoking. P260 Do not breathe mist / vapors / spray. P271 Use only outdoors or in a well-ventilated area. P273 Avoid release to the environment. P280 Wear protective gloves / eye protection / face protection. P302+352 IF ON SKIN: Wash with soap and water. P303+361+353 IF ON SKIN (or hair): Remove/Take off immediately all...

In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention immediately. Skin In case of contact, immediately flush skin with soap and plenty of water. Get medical attention immediately. Ingestion If swallowed, immediately contact Poison Control Center at 1-800-854-6813. DO NOT induce vomiting unless instructed to do so by medical personnel. Never give anything by mouth to an unconscious person. 4.2. Most important symptoms and effects, both acute and delayed Overview NOTICE: Reports have associated repeated and prolonged occupational...

Handling Vapors may cause flash fire or ignite explosively. In Storage Keep away from heat, sparks and flame. 7.2. Conditions for safe storage, including any incompatibilities Store between 40-100F (4-38C). Avoid contact with eyes, skin and clothing. Strong oxidizing agents. Do not smoke. Extinguish all flames and pilot lights, and turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. 7.3. Specific end use(s) Close container after each use. Wash thoroughly after handling. Prevent build-up of vapors by opening all windows and doors...

8.2. Exposure controls Respiratory Select equipment to provide protection from the ingredients listed in Section 3 of this document. Ensure fresh air entry during application and drying. If you experience eye watering, headache or dizziness or if air monitoring demonstrates dust, vapor, or mist levels are above applicable limits, wear an appropriate, properly fitted respirator (NIOSH approved) during and after application. Follow respirator manufacturer's directions for respirator use. FOR USERS OF 3M RESPIRATORY PROTECTION ONLY: For information and assistance on 3M occupational health...

10.1. Reactivity No data available 10.2. Chemical stability This product is stable and hazardous polymerization will not occur. Not sensitive to mechanical impact. Excessive heat and fumes generation can occur if improperly handled. 10.3. Possibility of hazardous reactions No data available 10.4. Conditions to avoid No data available 10.5. Incompatible materials Strong oxidizing agents. 10.6. Hazardous decomposition products FLAMMABLE/COMBUSTIBLE MATERIALS: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition...

12.2. Persistence and degradability No data available 12.3. Bioaccumulative potential Not Measured 12.4. Mobility in soil No data available 12.5. Results of PBT and vPvB assessment This product contains no PBT/vPvB chemicals. 12.6. Other adverse effects No data available 13.1. Waste treatment methods Do not allow spills to enter drains or watercourses. Dispose of in accordance with local, state and federal regulations. (Also reference RCRA information in Section 15 if listed). 14.2. UN proper shipping name PAINT RELATED MATERIAL 14.3. Transport hazard class(es) DOT (Domestic Surface...

Inventory. WHMIS Classification B2 D2B DOT Marine Pollutants (10%): (No Product Ingredients Listed) DOT Severe Marine Pollutants (1%): (No Product Ingredients Listed) EPCRA 311/312 Chemicals and RQs (>.1%) : Benzene, ethyl- (1000 lb final RQ; 454 kg final RQ) Xylenes (o-, m-, p- isomers) (100 lb final RQ; 45.4 kg final RQ) EPCRA 302 Extremely Hazardous (>.1%) : (No Product Ingredients Listed) EPCRA 313 Toxic Chemicals (>.1%) : Benzene, ethyl-Xylenes (o-, m-, p- isomers) Mass RTK Substances (>1%) : Benzene, ethyl-Xylenes (o-, m-, p- isomers) Penn RTK Substances (>1%) : Benzene, ethyl-Xylenes...

OT0202_1 H332 Harmful if inhaled. H335 May cause respiratory irritation. H336 May cause drowsiness or dizziness. H372 Causes damage to organs through prolonged or repeated exposure. H373 May cause damage to organs through prolonged or repeated exposure. This is the first revision of this SDS format, changes from previous revision not applicable. End of Document