video corpo

Awlstar Gold Label antifouling
2Pages

{{requestButtons}}

Catalog excerpts

Awlstar Gold Label antifouling - 1

US PRODUCT DATA SHEET AWL®STAR GOLD LABEL ANTI-FOULING (See Stock List for Code Numbers) Features & Uses For use below the waterline only. Unique cleaning mechanism prevents permanent attachment of slime and all other types of fouling organisms. Eliminates the need to dive and scrub. Self polishing surface "ablates" away at a controlled rate that reduces the drag on the underwater hull and increases speed. Excellent static fouling protection. Ideal for use where serious fouling conditions are encountered. Recommended for use where extended dry-docking intervals are required. Tin-free. Extended shelf-life. For use on fiberglass, steel, or wood hulls. Do not use on aluminum. Specification Data Type: Tin-free Polypeptide Co-Polymer Packaging: Available in 1 gallon and 1 quart containers. "(Metallic Copper Equivalent) (35.56%) (38.95%) (15.54%) Theoretical Coverage - Sq. Feet/Gallon: 780 Sq. Feet (72m2) at 1 mil dry (25 microns); 65 Sq. Feet (6m2) at recommended dry film thickness: 12 mils (300 microns) 3 to 4 coats. Coverage calculations are based on theoretical transfer efficiency of 100%. Actual coverage rate obtained will vary according to equipment choice, application techniques, part size, and application environment. Recoatability: With itself; 4 hours minimum at 77°F/50% R.H. No maximum recoattime. To Launch: 77°F/50% R.H.: 5 hours minimum, No maximum launch time. . Product Components, Reducers, Additives, and Auxiliary Components Application Equipment Conventional or airless spray, brush, or roller. Pressure feed equipment required for spray application. Airless Equipment Graco or Binks equivalent: : On a 25-1 pump, the input pressure gauge should read 70 to 80 lbs. On a 40-1 pump, the input pressure gauge should read 50 to 60 lbs. Pressure gauge should read 15-25 lbs. Atomizing 1 East Water Street • Waukegan, Illinois 60085 • USA • Tel: 847.599.6212 • Fax: 847.599.6209 Bannerlaan 54 • B-2280 Grobbendonk • Belgium • Intl. Tel: 32.14.257770 • Intl. Fax: 32.14.230880 76 Waterway Drive • Coomera • QLD 4209 • Australia • Tel: 61.7.5573.9600 or 1800.007.866 • Fax: 61.7.5573.9677 449 Tagore Industrial Avenue • 01 03 Hong Joo Industrial Building • Singapore 787820 • Tel: 65.6453.1981 • Fax: 65.6453.1778 Page 1 of 2 • Rev 2 - MAY 2005 US AWLSTAR GOLD LABEL ANTI-FOULING

Open the catalog to page 1
Awlstar Gold Label antifouling - 2

US PRODUCT DATA SHEET AWL®STAR GOLD LABEL ANTI-FOULING (See Stock List for Code Numbers) High Volume Low Pressure Guns Binks MACH 1 or equivalent pressure pot: Surface Preparation New Applications: Prime with HULL-GARD Epoxy Primer D6070/D3707. Apply first coat of AWLSTAR GOLD LABEL according to recommended recoat times (see Hull-Gard Epoxy Primer Product Datasheet). Renewing AWLSTAR: Power wash as soon as the boat comes out of the water, allow to dry. Sanding is not normally required but a thorough 80 grit sanding is advised under any of the following conditions: - Any time the cleanliness...

Open the catalog to page 2

All Awlgrip catalogs and brochures

  1. 545

    2 Pages

  2. AWLBRITRE

    2 Pages

  3. Awlcare

    2 Pages

  4. Awlcraft SE

    3 Pages

  5. Satin Matt

    3 Pages

  6. Griptex

    3 Pages

  7. Crater-X

    2 Pages

  8. Awlfair LW

    3 Pages

  9. D3200 D6200

    4 Pages

  10. Awlcoat TPC

    2 Pages

  11. Alumiprep 33

    1 Pages

  12. Awlwood

    5 Pages

  13. Awlcare

    2 Pages

  14. Awlwash

    2 Pages

  15. Awlcraft SE

    3 Pages

  16. Activators

    2 Pages

  17. 345HS Primer

    3 Pages

  18. Pro-Cure

    2 Pages

  19. REDUCERS

    3 Pages

  20. AWLGRIP

    6 Pages

  21. CF 2K

    3 Pages

Archived catalogs