Product Data Sheet Intended Uses Awlgrip HDT (High Definition Technology) is a high performance polyurethane sprayable topcoat that combines hardness and micro-scratch resistance with repairability. Tailored to provide exceptional gloss, unrivalled appearance and superior protection. * High gloss & excellent distinction of image (DOI) * Durable and repairable, making maintenance easier * True colors available on mixitcloud.com Specification Data Volume Solids Specific Gravity Available Packs Equipment Cleaning Typical Shelf Life 51% (mixed product including Activator) 1.05 (mixed product including Activator) 1 US Gallon (=3.78L) for Base and Curing Solution 1 US Quart (=0.95L) for Activators Awlgrip HDT Base Awlgrip HDT Curing Solution (OC0010) Awlgrip HDT Slow Activator (OA0010) Awlgrip HDT Medium Activator (OA0015) - US only - (US) Awlgrip HDT Fast Activator (OA0020) Activators are essential for the technology of this product to achieve the required curing. T0001, T0002, T0003 3 years for Base and Activators 1 year for Curing Solution Theoretical Coverage Coverage calculations are based on theoretical transfer efficiency of 100%. Actual coverage rate obtained will vary according to equipment choice, thinning, application techniques, part size and application environment. The total DFT can be reached in 2 to 3 coats depending on application. Polishing or sanding will reduce the overall DFT. Consider applying more coats to achieve the recommended film thickness. VOC All VOC information contained herein is theoretical (unless otherwise stated). Actual VOC content may vary by batch from one color to another and when tested via standard test methodology. VOC values are for the individual components and for the mixed product and recommended mixed ratio. Surface Preparation The surface preparation advice provided, and equipment suggestions, can be used as a guide. Preparation techniques and results will vary according to individual conditions, equipment choice/condition and other factors. Testing on a non-critical area should be carried out prior to full-scale preparation. Awlgrip HDT should be applied over 545 Epoxy Primer or previous Awlgrip Topcoat/Awlgrip HDT/Awlcraft 2000. Over Awlgrip Topcoat/Awlgrip HDT/Awlcraft 2000 sand topcoat with P400 to remove the gloss and clean with Surface Cleaner T0170 (US/AP) or T0340 (EU) using the two cloth wipe down method. Avoid painting in direct sunlight. Do not apply paint materials to surfaces less than 5°F (3°C) above dew point, or to surfaces warmer than 105°F (41°C). Ambient temperature should be minimum 55°F (13°C) and maximum 105°F (41°C). At standard conditions (77°F (25°C), 50% R.H.), avoid applying topcoats when the temperature could drop below the dew point within 6-8 hours after the application. Mixing & Reduction Mixing and reduction requirements will vary according to individual conditions, climate, equipment choice/condition and other factors. Mixing and application of a small sample before full-scale application is recommended. 1:1:12.5% (Base:Curing Solution:Activator) eg 1 Gallon:1 Gallon:1 Quart or 100mL:100mL:25mL. Induction time = 15 minutes. Mix to a smooth, homogenous mixture Awlgrip HDT is designed for spray application only. Correct choice of activator must be made according to the application conditions and project size. Awlgrip, the AkzoNobel logo and othe r products mentioned in this pu blication are trademarks of AkzoNobel. ©AkzoNobel 2022

Mixing & Reduction Mixing and reduction requirements will vary according to individual conditions, climate, equipment choice/condition and other factors. Mixing and application of a small sample before full-scale application is recommended. ProductMixData Sheet Ratio (by volume): 1:1:12.5% (Base:Curing Solution:Activator) eg 1 Gallon:1 Gallon:1 Quart or 100mL:100mL:25mL. AwlgripInduction HDTtime = 15 minutes. Mix to a smooth, homogenous mixture Awlgrip HDT is designed for spray application only. Correct choice of activator must be made according to the application conditions and project size....