Product Data Sheet Awlfair Surfacing Filler D6200 / D3200 Uses Awlfair Surfacing Filler is a premium two-component epoxy product. It is a non-shrinking glazing filler applicable over Awlfair LW Fairing Compound where it is used to fill sand scratches, pinholes and surface imperfections. Awlfair Surfacing Filler gives an outstanding smooth finish prior to applying the sealing, high build or finish primer. Utilizing the same technology as Awlfair LW, Awlfair Surfacing Filler has outstanding solvent resistance coupled with an improved Health and Safety profile. Specification Data Packaging: Available in 1HG pack (fill volume 1.89lts) base and 1QT pack (fill volume 0.946lts). Trowels, Spatulas, Putty Knives Theoretical Coverage Per Coat Awlfair Surfacing Filler is typically applied in several tight screeded layers up to a maximum total thickness of 20 mils / 500 microns Coverage calculations are based on theoretical transfer efficiency of 100%. Actual coverage rate obtained will vary according to equipment choice, application techniques, part size, and application environment. VOC All VOC information contained herein is theoretical (unless otherwise stated). Actual VOC content may vary by batch and when tested via standard test methodology Product Volume Solids: Specific Gravity: Surface Preparation The surface preparation advice provided, and equipment suggestions, can be used as a guide. Preparation techniques and results will vary according to individual conditions, equipment age and other factors. Testing on a non-critical area should be carried out prior to full-scale preparation. 2270 Morris Avenue • Union, New Jersey 07083 • USA • Tel: 908.686.1300 • Fax: 908.964.2219 Bannerlaan 54 • B-2280 Grobbendonk • Belgium • Intl. Tel: 32.14.257770 • Intl. Fax: 32.14.230880 76 Waterway Drive • Coomera • QLD 4209 • Australia • Tel: 61.7.5573.9655 or 1800.007.866 • Fax: 61.7.5573.9677 686 Rosebank Road • Avondale • Auckland • New Zealand • Tel: 64.9.828.3009 or 0800.150.527 • Fax: 64.9.828.1129 No.1 Tuas Avenue 4 • Singapore 639382 • Tel: 65.6862.2928 • Fax: 65.6862.0778 Page 1 of 3 Awlfair Surfacing Filler

Product Data Sheet Awlfair Surfacing Filler D6200 / D3200 Awlfair LW Fairing Compound should be sanded prior to application of the Awlfair Surfacing Filler. See the relevant product datasheet for more details Mixing & Reduction Mixing and reduction requirements will vary according to individual conditions, climate, equipment age and other factors. Mixing and application of a small sample before full scale application is recommended Application Method Putty Knife, trowel or spatula Recommended Thinning Do not thin Mix the two components thoroughly to a uniform brown colour with no streaks or lumps....

Product Data Sheet Awlfair Surfacing Filler D6200 / D3200 Note: In all cases, Awlfair Surfacing Filler must be sanded prior to recoating with itself or any other primer. Once sanded Awlfair Surfacing Filler must be overcoated within 24 hours. Do not spray topcoat direct to Awlfair Surfacing Filler. Awlfair Surfacing filler High Build Ultra Build Hullgard Epoxy Primer Hullgard Extra Epoxy Primer Epoxy Sprayable Fairing Compound *Awlfair Surfacing Filler must be sanded prior to overcoating **To achieve the optimum aesthetic result overcoat Awlfair Surfacing Filler with High Build Epoxy Primer before...